Kenwood KDC-7027 Instruction Manual

Also see for KDC-7027: Service manual

English | 33When hands free unit connectingAuto Response time AdjustSetting the time from an incoming call to theautomatic response.Display and Setting"HF WT OFF""HF WT 1S"…"HF WT 5S" (Original setting)…"HF WT 30S"• If the time set in the GSM telephone is shorter thanthat set in the unit, the former will be used.Touch Sensor ToneSetting the operation check sound (beep sound)ON/OFF.Display Setting"Beep ON" Beep is heard."Beep OFF" Beep canceled.Manual Clock Adjustment• This adjustment can be done when the 'SynchronizeClock' (page 33) is set as OFF.1 Select Clock Adjustment modePress the [FM] or [AM] button.Select the "Clock Adjust" display.2 Enter Clock Adjust modePress the [4] or [¢] button for at least 1second.The clock display blinks.3 Adjust the hoursPress the [FM] or [AM] button.Adjust the minutesPress the [4] or [¢] button.4 Exit Clock adjustment modePress the [MENU] button.Synchronize ClockSynchronizing the RDS station time data and thisunit’s clock.Display Setting"SYNC ON" Synchronizes the time."SYNC OFF" Adjust the time manually.• It takes 3 to 4 minutes to synchronize the clock.DSI (Disabled System Indicator)A red indicator will blink on the unit after thefaceplate is removed, warning potential thieves.Display Setting"DSI ON" LED flashes."DSI OFF" LED OFF.Selectable IlluminationSelecting the button illumination color as greenor red.Display Setting"Button Red" The illumination color is red."Button Green" The illumination color is green.Triangle indicator settingSets the blinking mode during triangle indicatorsystem adjustment (such as audio control, multi-key system setup).Display Setting"∞Blink ON" The Triangle indicator blinks."∞Blink OFF" The Triangle indicator does not blink.