Kenwood KDC-7027 Instruction Manual

Also see for KDC-7027: Service manual

The messages shown below display yoursystems condition.EJECT: No disc magazine has been loaded inthe changer. The disc magazine is notcompletely loaded.➪ Load the disc magazine properly.No CD in the unit.➪ Insert the CD.No Disc: No disc has been loaded in the discmagazine.➪ Load a disc into the disc magazine.TOC Error: No disc has been loaded in the discmagazine.➪ Load a disc into the disc magazine.The CD is quite dirty. The CD is upside-down. The CD is scratched a lot.➪ Clean the CD and load it correctly.E-05: The CD is upside-down.➪ Load the CD correctly.Blank Disc: Nothing has been recorded on the MD.No Track: No tracks are recorded on the MD,although it has a title.E-15: Media was played that doesn’t have datarecorded that the unit can play.➪ Use media that has data recorded thatthe unit can play.No Panel: The faceplate of the slave unit beingconnected to this unit has been removed.➪ Replace it.E-77: The unit is malfunctioning for some reason.➪ Press the reset button on the unit. If the"E-77" code does not disappear, consultyour nearest service center.Mecha Error: Something is wrong with the discmagazine. Or the unit is malfunctioning forsome reason.➪ Check the disc magazine. And thenpress the reset button on the unit. If the"Mecha Error" code does not disappear,consult your nearest service center.Hold Error: The protective circuit in the unit activateswhen the temperature inside theautomatic disc changer exceeds 60°C(140°F), stopping all operation.➪ Cool down the unit by openingthe windows or turning on the airconditioner. As the temperature fallsbelow 60°C (140°F), the disc will startplaying again.NO NAME: • Attempted to display DNPS during the CDplay having no disc names preset.• Attempted to display the ID3 tag whilethe MP3/WMA having no ID3 tag is beingplayed.Waiting: Radio text data is being received.Load: Discs are being exchanged in the Discchanger.Reading: The unit is reading the data on the disc.NO ACCESS: After setting it in the Disc Changer, DNPPwas done without having it been played atleast 1 time.IN (Blink): The CD player section is not operatingproperly.➪ Reinsert the CD. If the CD cannot beejected or the display continues to flasheven when the CD has been properlyreinserted, please switch off the powerand consult your nearest service center.Unsupported File:A MP3/WMA is played with a format thatthis unit can’t support.➪ ----Protected File: A copy-protected file is played.➪ ----Demo Mode: The Demonstration mode has beenselected.➪ Hold down button [5] and pressthe Reset button to release theDemonstration mode.English | 45

/ 48

Related manuals for Kenwood KDC-7027