English | 37Built-in Auxiliary input SettingSet the Built-in Auxiliary Input function.Display Setting"AUX OFF" When selecting the source there’s no Auxiliary Input."AUX ON" When selecting the source there’s Auxiliary Input.• This setting is done after setting 'Security Code' (page32).Function of the KDC-W7027In Standby modeCD Read SettingWhen there is a problem on playing a CD withspecial format, this setting play the CD by force.Display Setting"CD READ 1" Play CD and MP3/WMA."CD READ 2" Play CD by force.• Setting "CD READ 2" cannot play MP3/WMA.Some music CDs may not be played back even in the"CD READ 2" mode.When LX AMP unit connectingAMP ControlYou can control the LX AMP connected to theunit.1 Select AMP Control modePress the [FM] or [AM] button.Select the "AMP Control" display.2 Enter AMP Control modePress the [4] or [¢] button for at least 1second.3 Select the AMP Control item for adjustmentPress the [FM] or [AM] button.• For the details of the AMP Control item, see theInstruction manual attached to the LX AMP.4 Adjust the AMP Control itemPress the [4] or [¢] button.5 Exit AMP Control modePress the [MENU] button.• You cannot use the LX AMP operation during standbymode.Rotary volume operation selectVarious items can be set using the rotary volumeknob.Display Setting"Rotary ON" The rotary volume knob can be used for itemsetup."Rotary OFF" The rotary volume knob cannot be used foritem setup.• To use the rotary volume knob for item setup, select"Rotary ON" and press the [1] button in each setupmode.