• When the closing faceplate is hit by an object, the unit will turnoff without the faceplate closing all the way. Remove the objectand press the SRC button to turn the unit back on, then turn itoff again to make it close properly.• Do not try to press the buttons on the control panel as thefaceplate is moving, as excessive force may damage the unit.• During the forced closing of the unit (i.e., having the unit leftclosed whilst ignition is turned on), the faceplate will not openno matter how often the ignition is turned on or off.You can prevent tampering of the unit when letting someoneelse drive your car by keeping it closed this way.To cancell the forced closing of unit and open control panel:Press the left part at the upper side of the faceplate.The faceplate will open and show the control panel.NOTEThis function prevents tampering with the unit your car isbeing serviced etc.Hiding the unit with the ignition turned on (forced closing):Hold down the SRC button for one second or more.The faceplate will slide open. When the period of time whichyou have set in the "Time setting for removing the faceplate" inthe menu has passed, the faceplate automatically reverses tohide the control panel. However, you can remove the faceplateduring that period. For details, refer to the "Removing thefaceplate" (page 12).Forced ClosingYou can adjust the faceplate angle for easy viewing.Sliding the faceplate:Hold down the ANG button for one second or more.Do not apply excessive force to the faceplate under setting 2.NOTEFaceplate Angle AdjustmentThe original source (i.e., the one used before the phone call) isreturned to automatically, and the volume restored gradually.— 11 —