Kenwood KDC-7090R Instruction Manual

Also see for KDC-7090R: Service manual

Kenwood KDC-7090R Instruction Manual Manual pdf 31 page image

This function allows you to turn off the lower part of thedisplay if there is too much information in the display.Display and setting:"Graphic ON" : The display will turn on by using the whole partof the display. (Default setting)"Graphic OFF" : The display will turn on by using only the upperpart of the display and the IN indicatorSwitching Graphic DisplayDisplay and setting:"Button Green" : The colour of the illumination is green."Button Red" : The colour of the illumination is red.You can switch the colour of the button illumination betweengreen and red.Selectable IlluminationWith automatic time adjustment, you can set the clock timeautomatically according to time data sent from RDS stations(after receiving RDS signals for several minutes). You can alsoset the time manually if the automatic time adjustmentfunction is turned off.Display and setting:"SYNC ON" : Automatic time adjustment (Default setting)"SYNC OFF" : Manual time adjustmentAdjusting Time Automatically:Tune into an RDS station for 3 or 4 minutes.The time adjusts automatically to the correct local time.The time is not adjusted when the RDS station you are tuned tois not transmitting a time signal. Choose another RDS station insuch a case.NOTEAutomatic Time AdjustmentThe time display will blink.• Adjusting the hoursPress the FM button to advance the hours, or press the AMbutton to make the hours go back.• Adjusting the minutesPress the ¢ button to advance the minutes, or press the4 button to make the minutes go back.Press the MENU button to end the Manual Time Adjustmentmode.Exiting the Manual Time Adjustment mode would start theclock counting.43— 31 —