Kenwood KDC-7090R Instruction Manual

Also see for KDC-7090R: Service manual

Kenwood KDC-7090R Instruction Manual Manual pdf 16 page image

Store the frequency of the station currently being listened to.You can then recall that station with a single touch of abutton.Select the band/station that you want to have stored.Hold down the button (#1-6) that you want to use for thestation, for two seconds or more.The button number blinks once in the display to indicate thatthe data has been stored.Recalling a Preset Station:Press the preset station button (#1-6) for the desired station.The number of the recalled station is displayed.You can store 6 stations in each of the FM1, FM2, FM3, and AM(MW and LW) bands.NOTE21Station Preset MemorySelect the band by pressing the FM or AM button.Press the DIRECT button."----" is displayed for 10 seconds.If you make no input in the 10-second period, direct accesstuning is automatically cancelled.Enter the frequency of the desired station.If you want to listen to an FM station at 92.1 MHz, forexample, press 0, 9, 2, and 1.If you want to listen to an AM station at 810 kHz, for example,press 0, 8, 1, and 0.• You cannot enter frequencies above or below what a band canreceive.• FM frequencies can only be input in 0.1 MHz steps, and not0.01MHz steps.Cancelling Direct Access Tuning:Press the DIRECT button again.NOTE321When you know the frequency of the station that you want tolisten to, you can input it directly for quick access.Direct Access Tuning(Function of remote control)Press the SRC button repeatedly until the tuner mode isobtained. "TUNER" is displayed only when the tuner mode isselected.Press either the FM or AM button to select the band.Each time you press the FM button, the band switchesbetween the FM1, FM2 and FM3.Press the AM button to select the MW and LW bands.• Auto Seek TuningPress the ¢ button to seek increasing frequencies.Press the 4 button to seek decreasing frequencies.• Preset station seek tuningPress the ¢ button to move to the next preset station (i.e.,the one with the next highest number), and the 4 button tomove to the last preset station (i.e., the one with the nextlowest number).If the frequencies stored at the preset numbers receivestations which were not originally memorized when travellinglong distances, the preset number is not displayed. In suchcases, pressing the 4/¢ button to use preset stationseek will receive channel 1.• Manual TuningPress the ¢ button to increase the frequency by one step.Press the 4 button to decrease the frequency by one step.• The ST indicator lights up when stereo broadcasts are beingreceived.• Please see the menu settings about selecting tuning mode.(page 34)NOTENOTE321TuningTuner features— 16 —English