You can dim the display.The dimmer function is not available for units if the dimmer cableis not connected.Display and setting:"Dimmer ON" : The dimmer setting is on. (Default setting)"Dimmer OFF" : The dimmer setting is off.NOTEDimmerThis adjustment permits easy viewing of the display.Display and setting:"Contrast 0" – "Contrast 10"The initial setting value is "5".NOTEContrast Adjustmentblue adjust mode.The 4 and ¢ buttons are used to adjust the blue colortones, respectively.Press the #3 button to end the blue adjust mode.To store the colour setting in the memory:(colour preset memory)After adjusting the illumi colours, press the #5 button for twoseconds to store the colour setting in the memory.Pressing the #5 button again recalls the stored colours fromthe memory.Blue Adjust mode setting can’t do memoryPress the MENU button to end the Variable Illumination ColourSetting mode.7NOTE6Function of the KDC-V7090RYou can set the display to a desired colour.Display and setting:Select the display "Color" during the selecting function in themenu mode.To set a colour manually:Hold down on the 4 or ¢ button.Pressing the ¢ button advances the colour, and pressing the4 button reverses it.When the desirable colour is appeared, release the button.To make the popular colours appear:Press the preset button(#1-4) for the desired color.The buttons #1-4 are preset for the following four colours:#1: White#2: Red#3: Blue#4: Blue GreenTo switch colours depending on the situation:(Situational Mode)Each time you press the #6 button, the mode switches asfollows:When the Situational Mode is off, the original colour settingresumes.To finely adjust blue: (Blue Adjust Mode)Press the #3 button for two seconds or more to enter the5tScan ModetSRC Mode(Changing colours depending on the source being played)ttTime Mode(Colour changes every six hours)Situational Mode off4321Variable Illumination Colour SettingMenu settings— 32 —English