Kenwood KDC-BT42U Instruction Manual

Contents

Kenwood KDC-BT42U Instruction Manual Manual pdf 12 page image

22 English English 23CONTENTSFunction settings1 Press SRC to select a source other than “STANDBY”.2 Press the volume knob to enter [FUNCTION] mode.3 Turn the volume knob to select [AUDIO CONTROL/ AUDIO CTRL] or [SETTINGS], thenpress to enter.4 Turn the volume knob to make a selection, then press to confirm.■■ See table below for selection.■■ Repeat step 4 until the desired item is selected/activated.■■ Press to return to the previous item.5 Hold to finish the procedure.[AUDIO CONTROL/ AUDIO CTRL] : While listening to any source except in STANDBY state orBluetooth mode.Item Selectable setting (Preset: *)SUB-W LEVEL –15 — 0 * — +15: Adjusts the subwoofer output level.BASS LEVEL –8 — 0 * — +8: Source tone memory: Adjusts the level to memorize in each source. (Before making anadjustment, select the source you want to adjust.)MID LEVELTRE LEVELEQ PROBASS ADJUST BASS CTR FRQ/BASS C FRQ60/ 80/ 100 */ 200: Selects the center frequency.BASS LEVEL –8 — 0 * — +8: Adjusts the level.BASS Q FACTOR/BASS Q FCTR1.00 */ 1.25/ 1.50/ 2.00: Adjusts the quality factor.BASS EXTEND ON: Turns on the extended bass. ; OFF *: Cancels.MID ADJUST MID CTR FRQ/MID C FRQ0.5K/ 1.0K */ 1.5K/ 2.5K: Selects the center frequency.MID LEVEL –8 — 0 * — +8: Adjusts the level.MID Q FACTOR/MID Q FCTR0.75/ 1.00 */ 1.25: Adjusts the quality factor.TRE ADJUST TRE CTR FRQ/TRE C FRQ10.0K/ 12.5K */ 15.0K/ 17.5K: Selects the center frequency.TRE LEVEL –8 — 0 * — +8: Adjusts the level.PRESET EQ NATURAL */ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL: Selects a preset sound mode suitableto the music genre. (Selects [USER] to use the customized bass, middle, and treble settings.)BASS BOOST B.BOOST LV1/ B.BOOST LV2/ B.BOOST LV3: Selects your preferred bass boost level. ; OFF *: Cancels.LOUDNESS LOUDNESS LV1 */ LOUD LV1 */ LOUDNESS LV2/ LOUD LV2: Selects your preferred low and high frequenciesboost to produce a well-balanced sound at a low volume level. ; OFF: Cancels.BALANCE L15 — 0 * — R15: Adjusts the left and right speaker output balance.FADER R15 — 0 * — F15: Adjusts the rear and front speaker output balance.SUBWOOFER SET/SUB-W SETON *: Turns on the subwoofer output. ; OFF: Cancels.Item Selectable setting (Preset: *)DETAILED SET/DETAIL SETLPFSUBWOOFER/LPF SUB-WTHROUGH *: All signals are sent to the subwoofer. ;85/ 120/ 160 (HZ): Frequencies higher than the specified value are cut off.SUB-W PHASE REVERSE/REV (180°)/ NORMAL/NORM (0°) *: Selects the phase angle of the subwoofer output to be in linewith the speaker output for optimum performance. (Selectable only if a setting other than [THROUGH] isselected for [LPF SUBWOOFER/ LPF SUB-W].)SUPREME SET ON *: Creates realistic sound by interpolating the high-frequency components that are lost in AAC/ MP3/WMA audio compression. ; OFF: Cancels. (Selectable only when playback an AAC/ MP3/ WMA disc or a USBdevice, except iPod.) (Selectable only if “CD”/ “USB” is selected as the source.)VOLUMEOFFSET/VOL OFFSET–8 — 0 * — +8 (for AUX) ; –8 — 0 * (for other sources): Presets the volume adjustment level of eachsource. The volume level will automatically increase or decrease when you change the source. (Before makingan adjustment, select the source you want to adjust.)■■ Select a source before making a source tone memory adjustment, [EQ PRO].■■ [SUB-W LEVEL/ SUBWOOFER SET/ SUB-W SET/ LPF SUBWOOFER/ LPF SUB-W/ SUB-W PHASE] is selectable only if [SWITCHPREOUT/ SWITCH PRE] is set to [SUB-W]. (page 7)■■ [SUB-W LEVEL/ LPF SUBWOOFER/ LPF SUB-W/ SUB-W PHASE] is selectable only if [SUBWOOFER SET/ SUB-W SET] is set to[ON].[SETTINGS]Item Selectable setting (Preset: *)AUX NAME SET/AUX NAMEAUX */ TV/ VIDEO/ GAME/ PORTABLE/ DVD: Selects the desired name for the connected component.(Selectable only if “AUX” is selected as the source.)CLOCKCLOCK ADJUST/CLOCK ADJ(For details, see page 6.)TIME SYNC ON *: Synchronizes the Radio Data System station time data and the unit’s clock. ; OFF: Cancels.DISPLAYDISP DIMMER ON: Dims the display illumination. ; OFF *: Cancels.TEXT SCROLL AUTO */ ONCE: Selects to scroll the display information automatically, or scroll only once. ; OFF: Cancels.BT DVC STATUS/DVC STATUSYou can display the connection status, signal strength, and battery level of Bluetooth device.HF-CON: Connection status for cell-phone. ; AD-CON: Connection status for BT Audio. ;BATT: Battery level of cell-phone. ; SIGNAL: Signal strength of cell-phone.TUNER SET TI/ NEWS SET/ AF SET/ REGIONAL/ AUTO TP SEEK/ ATP SEEK: Selectable only if any source other than tunersource is selected. (For details, see page 8.)