Kenwood KDC-BT42U Instruction Manual

Contents

Kenwood KDC-BT42U Instruction Manual Manual pdf 4 page image

6 English English 7CONTENTSGetting StartedCanceling the displaydemonstrationThe display demonstration is always turnedon unless you cancel it.When you turn on the power (or after youreset the unit), the display shows:[CANCEL DEMO] \ [PRESS] \ [VOLUMEKNOB]1 Press the volume knob.[YES] is selected as the initial setup.2 Press the volume knob again to confirm.[DEMO OFF] appears.■■ If no operation is done for about 15 secondsor if you turn the volume knob to select[NO] in step 2, [DEMO MODE] appears andthe display demonstration starts.Setting the demonstration mode1 Press the volume knob to enter[FUNCTION].2 Turn the volume knob to select [DEMOMODE], then press to enter.3 Turn the volume knob to select [ON] or[OFF].If [ON] is selected, display demonstrationstarts if no operation is done for about 20seconds.4 Hold to finish the procedure.Adjusting the clock1 Press the volume knob to enter[FUNCTION] mode.2 Turn the volume knob to select[SETTINGS], then press to enter.3 Turn the volume knob to select [CLOCK],then press to enter.4 Turn the volume knob to select [CLOCKADJUST/ CLOCK ADJ], then press toenter.Clock hour flashes on the display.5 Turn the volume knob to adjust the hour,then press to enter minute adjustment.Clock minutes flashes on the display.6 Turn the volume knob to adjust theminute, then press to confirm.Press 4 / ¢ to move between thehour and minute adjustment.7 Hold to finish the procedure.Initial settings before operations1 Press SRC to enter [STANDBY] mode.2 Press the volume knob to enter [FUNCTION] mode.3 Turn the volume knob to select [INITIAL SET], then press to enter.4 Turn the volume knob to make a selection, then press to confirm.See table below for selection.5 Hold to finish the procedure.Item Selectable setting (Preset: *)PRESET TYPE NORMAL/ NORM *: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ MW/ LW). ;MIX: Memorizes one station for each preset button regardless of the selected band (FM1/ FM2/ FM3/ MW/ LW).KEY BEEP ON */ OFF: Activates/deactivates the keypress tone.RUSSIAN SET ON: Folder name, file name, song title, artist name, album name are displayed in Russian (if applicable). ;OFF *: Cancels.P-OFF WAIT Sets the duration when the unit will automatically turns off (while in standby mode) to save the battery.––– : Cancels ; 20M *: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutesBUILT-IN AUX/BUILTIN AUXON *: Enables “AUX” in source selection. Sound of the connected external component is produced through thecar speakers. ; OFF: Disables “AUX” in source selection.CD READ 1 *: Automatically distinguishes between audio file disc and music CD. ;2: Forces to play as a music CD. No sound can be heard if an audio file disc is played.SWITCH PREOUT/SWITCH PREREAR */ SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out terminals on therear of the unit (through an external amplifier).SP SELECT OFF */ 5/4/ 6 × 9/6/ OEM: Selects the speaker size for optimum performance.F/W UP xx.xx YES: Starts upgrading the firmware. ; NO *: Cancels (upgrading is not activated).For details on how to update the firmware, see: www.kenwood.com/cs/ce/