Kenwood KDC-BT73DAB Instruction Manual

Also see for KDC-5057SD: Manual Quick start guide

Contents

English | 133-2. PreparationsCancel the Demonstration modeCancel the Demonstration mode when you use theunit for the first time after installation.1 Press [Control] knob to cancel theDemonstration mode when the message "Tocancel DEMO Press the volume knob" appears(approx. 15 seconds).2 Turn [Control] knob to select the "YES", andthen press [Control] knob.The Demonstration mode can also be canceledin the Function Setting mode. Refer to <12-6.Demonstration mode setting> (page 60).Detaching/ Attaching the faceplate!• Remove the faceplate at once after pressing theRelease button; otherwise it can fall down due tovibration.• The faceplate is a precision component of the unitand can be damaged by shocks or jolts.• Keep the faceplate in its case while detached.• Do not place the faceplate (and case) in areasexposed to direct sunlight, excessive heat orhumidity. Also avoid places with too much dust orthe possibility of water splashing.3-3. How to select the itemFor how to select setting items such as a functionsetting item, see the following example:Example: Setting the Date format of the display1 Press [Control] knob."Function" appears and enters the Function settingmode.2 Select the Date Mode function item.Turn [Control] knob to select "Settings", andthen press [Control] knob.Next, turn [Control] knob to select"Clock&Date", and then press [Control] knob.Finally, turn [Control] knob to select "DateMode", and then press [Control] knob.To cancel and return to the previous item, press[1/6].3 Turn [Control] knob to select a format (7types), and then press [Control] knob.Returns to the previous item.4 Press and hold [1/6].Exits the Function setting mode.About the description in this manual• In this manual, operations performed in steps 2 and 3 aredescribed as follows:2 Select "Settings" > "Clock&Date" > "Date Mode"using [Control knob].3 Select a format (7 types) using [Control] knob.