English | 7716-6. Bluetooth detail settingYou can configure the initial settings of this unit.1 Press [Ú]."BT MODE" appears and enter the Bluetooth mode.2 Select "Settings" > "Detailed Settings" using[Control] knob.For how to use [Control] knob, refer to <3-3. Howto select the item> (page 13).3 Select a Bluetooth detail setting item using[Control] knob.Display Description"Auto Answer" Automatically answers a call after lapse of thepreset time interval."OFF": Does not answer the phone callautomatically."1SEC" – "8SEC" – "99SEC":Automatically answers the phone call after lapseof 1 – 99 seconds."Auto Reconnect" When set to "ON", starts re-pairing with theregistered Bluetooth device automatically whenit becomes unpaired."ON" / "OFF""Auto Pairing" When set to "ON", the Apple Auto Pairingfunction is turned on to automatically registerthe iPod touch or iPhone connected to this unit."ON" / "OFF""Bluetooth HF/Audio" Specifies the output speakers for hands-freevoice communication and Bluetooth audiosound."Front" : Outputs sound from the front speakers."All" : Outputs sound from the front and rearspeakers."Call Beep" Sets whether to output a beep from the speakerwhen a call comes in."ON" : Outputs a beep."OFF" : Does not output a beep."MIC Gain" Adjusts the sensitivity of the microphone fortelephone call or adjusts the voice of the caller."-20" – "0" – "+8""Echo Cancel Level" Sets the echo cancellation level."1" – "4" – "10"(Colored text: Factory setting)4 Select a setting using [Control] knob.Returns to the previous item.Exiting from the Bluetooth modePress [Ú].