English|215-6. Listening position settingYou can adjust sound localization according to thelistening position.1Press [SRC] to select a source other thanStandby ("STANDBY").Refer to (page 14).2Press [Control] knob.Enters the Function setting mode.3Select "Audio Control" > "Pro Setup" > "DTASettings" > "Preset Position" using [Control]knob.For how to use [Control] knob, refer to <3-3. Howto select the item> (page 13).4Select a listening position using [Control]knob.DisplayCompensation seat"All"Not compensating."Front R"Front Right seat"Front L"Front Left seat"Front All"Front seatExiting from the Function setting modePress and hold [1/6].5-7. Delay time controlAdjusting fine tuning of the speaker positioncompensation value specified at <5-3. Car typeselection> (page 19).Preparation for setting•If you specify the distance from the center of the currentlyset listening position to every speaker, the delay time willbe automatically computed and set.1.Determine the center of the currently set listeningposition as the reference point (•in the illustration shownbelow).2.Measure the distances from the reference point to thespeakers.3.Calculate the differences between the distance of thefurthest speaker and other speakers.4.Input the differences calculated in step 3 for individualspeakers.5.Adjust gain for individual speakers. A sound image will beshifted to the speaker with increased gain.Example:When "Front" is selected as the listening position(<5-6. Listening position setting> (page 21)).1Press [SRC] to select a source other thanStandby ("STANDBY").Refer to (page 14).2Press [Control] knob.Enters the Function setting mode.3Select "Audio Control" > "Pro Setup" > "DTASettings" > "DTA" using [Control] knob.For how to use [Control] knob, refer to <3-3. Howto select the item> (page 13).4Select a speaker using [Control] knob.SpeakerDisplayRangeFront Left speaker"FrontL"0 – 610 cmFront Right speaker"FrontR"0 – 610 cmRear Left speaker"RearL"0 – 610 cm
