Kenwood KDC-BT73DAB Instruction Manual

Also see for KDC-5057SD: Manual Quick start guide

Contents

46 | KDC-BT73DAB/ KDC-BT53U/ KDC-5057SD10. Listen to the Digital Radio (KDC-BT73DAB)10-1. Listening to the Digital RadioSelecting a tuner sourcePress [SRC] to select a Digital Radio ("DIGITALRADIO") source.Refer to (page 14).Searching an ensemblePress and hold [E] or [F].Searching an ensemble, service, andcomponentPress [E] or [F].T: Press [E]U: Press [F]Ens.: ensembleServ.: serviceCompo.: componentThe seek mode can be changed. Refer to (refer to below), <10-9. Digital Radio setting> (page 50).Selecting a Seek modePress [S].Display Operation"Auto1" Press: Select an ensemble, service, and component.Press and hold: Automatic search for an ensemble."Auto2" Search in order of the service in the preset memory."Manual" Press: Select an ensemble, service, and component.Press and hold: Manually search for an ensemble.Updating Service List informationPress and hold [R].10-2. Service preset memoryYou can store a ensemble, service, and componentin the memory.1 Press [E] or [F] to select the ensemble,service, and component.2 Press [1/6] twice.Enter the Preset memory mode.3 Turn [Control] knob to select a memorynumber ("1" – "18").4 Press and hold [Control] knob.Exiting from the Preset memory modePress and hold [1/6].About the Mix Station preset mode• If you press [1/6] three times in step 2, the Mix Stationpreset mode is selected with "Mixed Preset List" displayed.In this mode, different bands and tuner sources (FM,AM, Digital Radio etc.) can be saved in the same presetlayer, which allows you to recall a desired station withoutswitching between bands and/or tuner sources. Maximumof 6 stations can be preset in the Mix Station preset mode.Once the Mix Station preset mode is set, you can enter thesame mode by just pressing [1/6] once in step 2.Pressing [1/6] twice allows you to return to the normalStation preset mode.