Kenwood KDC-BT73DAB Instruction Manual

Also see for KDC-5057SD: Manual Quick start guide

Contents

24 | KDC-BT73DAB/ KDC-BT53U/ KDC-5057SD5-10. DSP presetYou can register the values set the DSP controlitems.1 Set the DSP control itemsRefer to the following operations to setup theSound Control.- "SubWoofer Level" of <5-1. Audio control> (page18)- <5-2. Manual equalizer control> (page 19)- <5-3. Car type selection> (page 19)- <5-4. Speaker setting> (page 20)- <5-5. X’Over setting> (page 20)- <5-6. Listening position setting> (page 21)- <5-7. Delay time control> (page 21)- <5-8. Channel level fine adjustments> (page22)2 Press [Control] knob.Enters the Function setting mode.3 Select "Audio Control" > "Pro Setup" > "AudioPreset" > "Memory" using [Control] knob.For how to use [Control] knob, refer to <3-3. Howto select the item> (page 13).4 Select a memory number ("Memory 1" or"Memory 2") using [Control] knob.5 Select "YES" using [Control] knob."Memory Completed" appears.Exiting from the Function setting modePress and hold [1/6].When reset• When this unit is reset, all setting values stored in "Memory1" are applied to the source.5-11. DSP preset recallYou can recall the DSP control items registered tothe <5-10. DSP preset> (page 24).1 Press [SRC] to select a recall source.Refer to (page 14).2 Press [Control] knob.Enters the Function setting mode.3 Select "Audio Control" > "Pro Setup" > "AudioPreset" > "Recall" using [Control] knob.For how to use [Control] knob, refer to <3-3. Howto select the item> (page 13).4 Select a recall memory number ("Recall 1" or"Recall 2") using [Control] knob.5 Select "YES" using [Control] knob."Recall Completed" appears.Exiting from the Function setting modePress and hold [1/6].DSP settings (KDC-BT73DAB, KDC-BT53U)