Kenwood KDC-BT742U Instruction Manual

Also see for eXcelon KDC-X493: Service manual Instruction manual

Kenwood KDC-BT742U Instruction Manual Manual pdf 16 page image

16 | KDC-BT742U/ KDC-X493/ KDC-MP442UOperation of hands-free phoningFunction of KDC-BT742UDial a number1 Enter dialing method modePress the [ ] button.2 Select the number dial modePress the [AUD] knob.Select the “NUMBER DIAL” display.3 Enter a phone numberPress the number ([1] – [0]), #([FM]), *([AM]), or+([¢]) button on the remote controller.4 Make a callPress the [DIRECT] button on the remotecontroller.To erase the entered phone number digit bydigit:Press the [4] button on the remote controller.⁄• You can input max 32 digits.Speed dialing (Preset dial)1 Enter dialing method modePress the [ ] button.2 Press the [AUD] knob.Select the “NUMBER DIAL” display.3 Enter preset dial modePress the [SEARCH] button.4 Select the number you want to recall from thememoryCalling a number in the Phone Book1 Enter dialing method modePress the [ ] button.2 Select the Phone Book modePress the [AUD] knob.Select the “PHONE BOOK1” display, proceed to step3.Select the “PHONE BOOK2” display, proceed to step4.3 Select the initial to be searched forOperation type OperationMove to the next character. Turn the [AUD] knob or push it towardsright or left.Move to the next row. Push the [AUD] knob towards up ordown.Determine the selected initial. Press the [AUD] knob for at least 1second.4 Select the nameOperation type OperationMove to the next phonenumber.Turn the [AUD] knob or push it towardsup or down.Move to the next name. Push the [AUD] knob towards rightor left.5 Make a callPress the [AUD] knob for at least 1 second.⁄• During search, a non-accent character such as “u” issearched for instead of an accent character such as “ü”.Making a call1 Enter dialing method modePress the [ ] button.2 Select a dialing methodPress the [AUD] knob.“NUMBER DIAL” » “PHONE BOOK1” » “PHONE BOOK2”» “OUT-CALL” » “IN-CALL” » “MISSED CALLS”Methods of operations in the above modes aredescribed below.3 Exit the dialing method modePress the [ ] button.Turn the [AUD] knob or push it towards up ordown.5 Press the [AUD] knob.Phone number is displayed.6 Make a callPress the [AUD] knob for at least 1 second.⁄• You need to register the preset dial number. (page 17)