Kenwood KDC-BT742U Instruction Manual

Also see for eXcelon KDC-X493: Service manual Instruction manual

Kenwood KDC-BT742U Instruction Manual Manual pdf 29 page image

English | 29Downloading the Phone BookDownload the phone book data from the cell-phone to this unit so that you can use the PhoneBook of this unit.To download automaticallyIf the cell-phone supports a phone booksynchronization function, the phone book isdownloaded automatically after Bluetoothconnection.⁄• Setting on the cell-phone may be required.• If no phone book data is found in the unit even afterthe compete display, your cell-phone may not supportautomatic download of phone book data. In this case, trydownloading manually.To download from the cell-phone manually1 By operating the cell-phone, end the hands-freeconnection.2 By operating the cell-phone, send the phonebook data to this unitBy operating the cell-phone, download the phonebook data to this unit.• During downloading:“DOWNLOADING” is displayed.• After completion of downloading:“COMPLETE” is displayed.3 By operating the cell-phone, start the hands-free connection.2 Input the PIN codeOperation type OperationSelect the numbers. Turn the [AUD] knob or push it towardsup or down.Move to the next digit. Push the [AUD] knob towards right.Delete the last digit. Push the [AUD] knob towards left.3 Register a PIN codePress the [AUD] knob for at least 1 second.If “COMPLETE” is displayed, registration iscompleted.4 Exit the PIN code edit modePress the [SEARCH] button.⁄• By default, “0000” is specified.• A PIN code can be specified with up to eight digits.To clear the downloading completion messagePress any button.⁄• Up to 1000 phone numbers can be registered for eachregistered cell-phone.• Up to 32 digits can be registered for each phone numberalong with up to 50* characters representing a name.(* 50: Number of alphabetic alphabetical characters.Fewer characters can be input depending on the typeof characters.)• To cancel downloading of the phone book data, operatethe cell-phone.Selecting the Bluetooth device YouWish to ConnectWhen two or more Bluetooth devices have alreadybeen registered, you need to select the Bluetoothdevice you wish to use.1 Enter Bluetooth device selection modeSelect “MENU” > “PHONE SEL”.Press the [AUD] knob for at least 1 second.For how to select Function Control item, refer to (page 6).‘(name)’ is displayed.2 Select the Bluetooth deviceTurn the [AUD] knob or push it towards up ordown.3 Set up the Bluetooth devicePush the [AUD] knob towards right or left.‘✱(name)’ or ‘-(name)’ is displayed.“✱”: The selected Bluetooth device is busy.“-”: The selected Bluetooth device is on standby.“ “ (blank): The Bluetooth device is deselected.4 Exit the Bluetooth device selection modePress the [SEARCH] button.⁄• If a cell-phone is already selected, deselect it, and thenselect a different one.