32 | KDC-BT742U/ KDC-X493/ KDC-MP442UBluetooth SetupDownloading the SMSDownload the short message (SMS) arrived at thecell-phone so that it can be read on this unit.1 Enter SMS download modeSelect “MENU” > “SMS DOWNLOAD”.Press the [AUD] knob for at least 1 second.For how to select Function Control item, refer to (page 6).A message list appears.2 Start downloadingPress the [AUD] knob.“DOWNLOADING” is displayed.When the downloading finishes, “COMPLETE” isdisplayed.3 Exit the SMS download modePress the [SEARCH] button.⁄• The cell-phone must be able to transmit the SMS usingBluetooth. Setting on the cell-phone may be required.If the cell-phone does not support SMS function, theSMS download item in Function Control mode is notdisplayed.• When the SMS is downloaded from the cell-phone, theunopened messages in the cell-phone are opened.• The already-read and unread short messages can berespectively downloaded up to 75.Function of KDC-BT742U⁄• The unopened message is displayed at the beginningof the list. Other messages are displayed in the order ofreception.• The SMS that has arrived when the cell-phone is notlinked with Bluetooth cannot be displayed. Downloadthe SMS.• The short message cannot be displayed duringdownloading the SMS.Basic OperationSelecting Satellite Radio sourcePress the [SRC] button.Select the “SAT”/ “SIRIUS”/ “XM” display.⁄• You need to register to the service provider to receivethe service by Satellite Radio. Consult the serviceprovider if “CALL … TO SUBSCRIBE” appears.• The radio may take a little time to start receiving afteryou select the Satellite Radio source.• If the signal reception fails, “ACQUIRING SIGNAL”/ “NOSIGNAL” appears.Switching Seek ModeFor KDC-X493/MP442U: Press the [AUTO]button.For KDC-BT742U: Press the [AUTO] button for atleast 1 second.Display Operation“CHANNEL” Normal manual seeking control.“PRESET” Search in order of the channels in the Preset memory.Select the channelPush the [AUD] knob towards right or left.Selecting the Preset BandPush the Control knob toward up.Each time you push the knob, the preset bandalternates between the SR1, SR2, SR3 and SR4.Category and Channel SearchSelecting the channel and category you want toreceive.1 Enter Category and Channel Search modePress the [SEARCH] button.2 Select the Category and Channel SearchTurn the [AUD] knob to select “CH SEARCH”, andthen press the [AUD] knob.3 Select the CategoryTurn the [AUD] knob or push it towards up ordown.4 Select the ChannelPush the [AUD] knob towards right or left.Cancelling Category and Channel Search modePress the [SEARCH] button.Satellite Radio tuner control(Optional)
