Kenwood KDC-BT742U Instruction Manual

Also see for eXcelon KDC-X493: Service manual Instruction manual

Kenwood KDC-BT742U Instruction Manual Manual pdf 33 page image

English | 33Preset MemoryPutting the channel in the memory.1 Select the channel to put in the memoryPush the [AUD] knob towards right or left.2 Enter Preset Memory modePress the [SEARCH] button.3 Select the number to put in the memoryTurn the [AUD] knob or push it towards up ordown.4 Determine the number to put in the memoryPress the [AUD] knob for at least 1 second.Cancelling the Preset Memory modePress the [SEARCH] button.⁄• Only the channel number is stored. Category informationis not stored.Preset TuningRecalling the channels in the memory.1 Enter Preset Tuning Select modePress the [SEARCH] button.2 Select a desired station in the memoryTurn the [AUD] knob or push it towards up ordown.3 Recall the stationPress the [AUD] knob.Cancelling Preset TuningPress the [SEARCH] button.Function of remote controlDirect Access TuningEntering the channel and tuning.1 Enter Direct Access Tuning modePress the [DIRECT] button on the remotecontrol.2 Enter the channelPress the number buttons.3 Do Channel SearchPress the [4] or [¢] button.Cancelling Direct Access TuningPress the [DIRECT] button on the remotecontrol.⁄• If you make no button operation for 10 seconds, theDirect Access Tuning mode is automatically canceled.• If you cannot receive any signal in the input Channel dueto bad conditions on radio wave or other such problems,“ACQUIRING SIGNAL”/ “NO SIGNAL” appears.Channel ScanEvery receivable Channel is checked for 10 seconds.1 Start Channel ScanSelect “CH-SCAN”.For how to select Function Control items, refer to (page 6).2 Release it when the channel you want to listento is receivedPress the [AUD] knob.⁄• You cannot Channel search until the categoryinformation is acquired.