|
English | 23Cabin selectionYou can compensate the delay of the sound arrivaltime by selecting your environment from thefollowing car types;Car type DisplayNot compensating. “OFF”Compact car “COMPACT”Full size car “F-SIZE”Station wagon “WAGON”Minivan “MINIVAN”Sport-utility vehicle “SUV”Minivan Long “MV-LONG”1 Enter Cabin select modeSelect “DSP” > “SETUP” > “CABIN”.For how to select Function Control item, refer to (page 6).2 Select the car typeTurn the [AUD] knob and push the center whenthe desired item is displayed.3 Exit Cabin select modePress the [SEARCH] button.⁄• You can compensate the distances in more details byusing (page 23) function.Speaker SettingSetting the speaker to be connected, speaker size,and installation position;Setting speaker Display RangeFront“FRONT”SpeakerLocation“LOCATION” “DOOR”/ “ON DASH”/“UND DASH”SpeakerSize“SIZE” “SMALL” / “MEDIUM”/ “LARGE”Tweeter “TWEETER” “NONE”/ “USE”Rear“REAR”SpeakerLocation“LOCATION” • “DOOR”/ “REAR DECK”•“2ND ROW”/ “3RD ROW”(Minivan/ Passenger van)SpeakerSize“SIZE” “NONE”/ “SMALL” / “MEDIUM”/“LARGE”Subwoofer“SUB-W”SpeakerSize“SIZE” “NONE”/ “SMALL” / “LARGE”1 Enter Speaker Setting modeSelect “DSP” > “SETUP” > “SPEAKER”.For how to select Function Control item, refer to (page 6).Audio Adjustments (DSP)Function of KDC-BT742U2 Select the item you want to setTurn the [AUD] knob and push the center whenthe desired item is displayed.3 Set the valueTurn the [AUD] knob and push the center whenthe desired item is displayed.4 Exit Speaker Setting modePress the [SEARCH] button.DTA (Digital Time Alignment) settingAdjusting fine tuning of the speaker positioncompensation value specified at (page 23).1 Enter DTA setting modeSelect “DSP” > “SETUP” > “DTA”.For how to select Function Control item, refer to (page 6).2 Select the speaker you want to setSetting speaker DisplayFront speaker “FRONT”Rear speaker “REAR"Subwoofer “SUB-W"Turn the [AUD] knob and push the center whenthe desired item is displayed.3 Set the compensation value of the speakerpositionTurn the [AUD] knob and push the center whenthe desired value is displayed.Adjust between 0 and 14.44 feet.Refer to (page 38) on how to set thecompensation value.4 Exit DTA setting modePress the [SEARCH] button.
|
