Kenwood KDC-BT765HD Instruction Manual

6Direct Access Tuning (using RC-406)1 Press DIRECT to enter Direct Access Tuning.2 Press the number buttons to enter a frequency.3 Press to search for a station or channel.• To cancel, press or DIRECT.• If no operation is done for 10 seconds after step 2, Direct Access Tuningis automatically canceled.Select an HD Radio multicast channelMany HD Radio stations offer more than one channel programming.This service is called multicasting. While receiving HD Radio multicastchannels....Press S / T to select your desired channel (HD1 to HD8).“LINKING” appears while linking to a multicast channel.Other settings1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select an item (see the following table),then press the knob.3 Repeat step 2 until the desired item is selected or activated.4 Press and hold to exit.To return to the previous setting item, press .HD Radio™ tunerDefault: XXTUNER SETTINGIF BAND AUTO: Increases the tuner selectivity to reduce interference noises fromadjacent FM stations. (Stereo effect may be lost.) ; WIDE: Subjects tointerference noises from adjacent FM stations, but sound quality will notbe degraded and the stereo effect will remain.AUTO MEMORY YES: Automatically starts memorizing 6 stations with good reception. ;NO: Cancels.• Selectable only if [NORMAL] is selected for [PRESET TYPE]. ( 4)RECEIVE MODE Sets the receive mode of the HD Radio receiver.AUTO: Automatically tunes to analog broadcast when there is nodigital broadcast. ; DIGITAL: Tunes in to digital broadcast only. ;ANALOG: Tunes in to analog broadcast only.CLOCKTIME SYNC ON: Synchronizes the unit’s time to the Radio Broadcast Data Systemstation time. ; OFF: Cancels.