Kenwood KDC-BT765HD Instruction Manual

ENGLISH 19BLUETOOTH®Settings in memoryStore a contact in memoryYou can store up to 6 contacts into the number buttons (1 to 6).1 Press to enter Bluetooth mode.2 Turn the volume knob to select [CALL HISTORY], [PHONE BOOK], or[NUMBER DIAL], then press the knob.3 Turn the volume knob to select a contact or enter a phone number.If a contact is selected, press the volume knob to show the phonenumber.4 Press and hold one of the number buttons (1 to 6).“STORED” appears when the contact is stored.To erase a contact from the preset memory, select [NUMBER DIAL] in step 2and store a blank number.Make a call from memory1 Press to enter Bluetooth mode.2 Press one of the number buttons (1 to 6).3 Press the volume knob to call.“NO MEMORY” appears if there is no contacts stored.Other settings1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select an item (see the following table),then press the knob.3 Repeat step 2 until the desired item is selected/activated or followthe instructions stated on the selected item.4 Press and hold to exit.To return to the previous setting item, press .Default: XXBT MODEPHONE SELECT Selects the phone or audio device to connect or disconnect.“*” appears in front of the device name when connected.• You can only connect a maximum of two Bluetooth phones and oneBluetooth audio device at any time.AUDIO SELECTDEVICE DELETE 1 Turn the volume knob to select a device to delete, then press theknob.2 Turn the volume knob to select [YES] or [NO], then press the knob.PIN CODE EDIT(0000)Changes the PIN code (up to 6 digits).1 Turn the volume knob to select a number.2 Press S / T to move the entry position.Repeat steps 1 and 2 until you finish entering the PIN code.3 Press the volume knob to confirm.RECONNECT ON: The unit automatically reconnect when the last connectedBluetooth device is within range. ; OFF: Cancels.AUTO PAIRING ON: The unit automatically pair supported Bluetooth device (iPhone/iPod touch/ Android device) when it is connected through USB inputterminal. Depending on the operating system of the connected device,this function may not work. ; OFF: Cancels.INITIALIZE YES: Initializes all the Bluetooth settings (including stored pairing,phonebook, and etc.). ; NO: Cancels.