Kenwood KDC-BT765HD Instruction Manual

18BLUETOOTH®Make a callYou can make a call from the call history, phonebook, or dialing the number. Call byvoice is also possible if your mobile phone has the feature.1 Press to enter Bluetooth mode.2 Turn the volume knob to select an item (see the following table), then press theknob.3 Repeat step 2 until the desired item is selected/activated or follow theinstructions stated on the selected item.4 Press and hold to exit.To return to the previous setting item, press .CALL HISTORY (Applicable only if the phone supports PBAP)1 Press the volume knob to select a name or a phone number.• “INCOMING”, “OUTGOING”, or “MISSED” is shown on the lower part of the displayto indicate the previous call status.• Press DISP to change the display category (NUMBER or NAME).• “NO DATA” appears if there is no recorded call history.2 Press the volume knob to call.PHONE BOOK (Applicable only if the phone supports PBAP)1 Turn the volume knob quickly to enter alphabet search mode (if the phonebookcontains many contacts).The first menu (ABCDEFGHIJK) appears.• To go to the other menu (LMNOPQRSTUV or WXYZ1*), press J / K.• To select the desired first letter, turn the volume knob or press S / T, thenpress the knob.Select “1” to search with numbers and select “*” to search with symbols.2 Turn the volume knob to select a name, then press the knob.3 Turn the volume knob to select a phone number, then press the knob to call.• The phonebook of the connected phone is automatically transferred to the unit whenpairing.• Contacts are categorized as: HOME, OFFICE, MOBILE, OTHER, GENERAL• This unit can display only non-accent letters. (Accent letters such as “Ú” is showns as“U”.)NUMBER DIAL 1 Turn the volume knob to select a number (0 to 9) orcharacter ( , #, +).2 Press S / T to move the entry position.Repeat steps 1 and 2 until you finish entering thephone number.3 Press the volume knob to call.(or using RC-406)1 Press the number buttons (0 to 9) to enter the phonenumber.2 Press to call.VOICE Speak the name of the contact you want to call or thevoice command to control the phone functions.( Make a call using voice recognition)BATT LOW/ MID/ FULL*: Shows the strength of the battery.NO SIGNAL/ LOW/ MID/ MAX*: Shows the strength of the current receivedsignal.* Functionality depends on the type of the phone used.Make a call using voice recognition1 Press and hold to activate the voice recognition ofthe connected phone.2 Speak the name of the contact you want to call or thevoice command to control the phone functions.• Supported Voice Recognition features vary for each phone.Refer to the instruction manual of the connected phone fordetails.• This unit also supports the intelligent personal assistantfunction of iPhone.