Kenwood KDC-BT765HD Instruction Manual

16BLUETOOTH — Mobile phoneReceive a callWhen there is an incoming call:• The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. ( 17)During a call:• The buttons and display illuminate according to the settings made for [DISPLAY]. ( 23)• If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected.The following operations may differ or not available depending on the connected phone.To On the faceplate On the remote controlFirst incoming call...Answer a call Press or the volume knobor one of the number buttons(1 to 6).Press .Reject a call Press . Press .End a call Press . Press .BLUETOOTH®Connect with a remote device by One-touch(NFC)Near Field Communication (NFC) enables short-rangewireless communication between the unit and remotedevices.By holding an NFC-compatible remote device nearto the N-Mark on the unit (volume knob), the unitand remote device proceed to complete pairing andestablished the BLUETOOTH connection automatically.1 Activate the NFC function on the remote device.Refer to the instruction manual of the remote devicefor more information.2 Hold the remote device near to the N-Mark on theunit (volume knob).The device vibrates when pairing is completed.• To disconnect, hold the remote device near to theN-Mark on the unit (volume knob) again.• This unit only can recognize and connect to one NFC-compatible device at a time.