Kenwood KDC-BT945U Instruction Manual

Also see for KDC-BT945U: Service manual Quick start guide Instruction manual

Contents

Kenwood KDC-BT945U Instruction Manual Manual pdf 21 page image

English | 21Station Preset MemoryPutting a station in the memory.1 Select the radio band and tune in a desiredradio station you wish to store in the presetmemory2 Enter Menu List modePress the [MENU] button.3 Enter Preset Memory modeTurn the [VOL] knob and press it when thedesired item is displayed.Select “List & Memory”.4 Select the number to put in the memoryTurn the [VOL] knob and press it for at least 2seconds when the desired item is displayed.Select a preset number.Display Overview“List & Memory”“-1” Preset number 1.“-2” Preset number 2.…“-6” Preset number 6.Cancelling the Preset Memory modePress the [MENU] button for at least 1 second,and then press it again briefly.Auto Memory EntryPutting stations with good reception in the memoryautomatically.1 Select the radio band you wish to store in thepreset memory2 Enter Menu List modePress the [MENU] button.3 Enter Auto Memory Entry modeTurn the [VOL] knob and press it when thedesired item is displayed.Select “Settings” > “Auto Memory”.4 Open Auto Memory EntryTurn the [VOL] knob and press it when thedesired item is displayed.Select “YES”.When 6 stations that can be received are put in thememory, auto memory entry closes.Preset TuningRecalling the stations in the memory.1 Select the radio band2 Select a desired station in the memoryTurn the [VOL] knob and press it when thedesired item is displayed.Select “List & Memory” > Preset number.Function of remote controlDirect Access TuningTuning in a desired radio station by entering thefrequency.1 Select the radio band2 Enter Direct Access Tuning modePress the [DIRECT] button on the remotecontrol.“– – – –” is displayed.3 Enter the frequencyPress the number buttons on the remotecontrol.Example:Desired frequency Press button92.1 MHz (FM) [9], [2], [1]810 kHz (AM) [8], [1], [0]4 Tune in to the entered frequencyPress the [4] or [¢] button.Cancelling Direct Access TuningPress the [DIRECT] button on the remotecontrol.