Kenwood KDC-BT945U Instruction Manual

Also see for KDC-BT945U: Service manual Quick start guide Instruction manual

Contents

Kenwood KDC-BT945U Instruction Manual Manual pdf 40 page image

40 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745UAudio AdjustmentsListening Position SelectionThe sound environment can be compensated inaccordance with the selected position. According tothe listening position, select the position from thefollowing settings.Compensation seat DisplayNot compensating. “ALL”Front-Left seat “Front-Left”Front-Right seat “Front-Right”Front seat “Front”( : Factory setting)1 Select the sourcePress the [SRC] button. Turn the [VOL] knob andpress it when the desired item is displayed.Select a source other than “STANDBY”.✍ SRC Select mode 2: Pressing the [SRC] buttonrepeatedly switches source.2 Enter Audio Control modePress the [VOL] knob.3 Enter Preset position setting modeTurn the [VOL] knob and press it when thedesired item is displayed.Select “Position” > “Preset Position”.4 Select the seat you want to compensatePress the [4] or [¢] button.5 Exit Audio Control modePress the [MENU] button for at least 1 second,and then press it again briefly.Function of KDC-X994/ KDC-X794Listening Position Fine AdjustmentsMaking fine adjustment of the value specified atPreset position selection per speaker.1 Select the sourcePress the [SRC] button. Turn the [VOL] knob andpress it when the desired item is displayed.Select a source other than “STANDBY”.✍ SRC Select mode 2: Pressing the [SRC] buttonrepeatedly switches source.2 Enter Audio Control modePress the [VOL] knob.3 Enter Manual position setting modeTurn the [VOL] knob and press it when thedesired item is displayed.Select “Position” > “DTA”.4 Select the speaker you want to setTurn the [VOL] knob and press it when thedesired value is displayed.Item Setting overview“FRONT” / “L” Front Left speaker“FRONT” / “R” Front Right speaker“REAR” / “L” Rear Left speaker“REAR / “R” Rear Right speaker“SUBWOOFER” / “L” Subwoofer Left“SUBWOOFER” / “R” Subwoofer Right“INITIAL” Initialize the setting values.5 Set the valuePress the [4] or [¢] button.Adjust between 0 and 5.58 feet.Press the [VOL] knob for at least 1 second if youwant to execute the “INITIAL”.6 Exit Audio Control modePress the [MENU] button for at least 1 second,and then press it again briefly.Dual Zone SystemMain source and sub source (Auxiliary input) outputFront channel and Rear channel separately.Display Overview“2Zone Rear Volume”* 1 Adjust the volume of Rear channel.“0” — “35”“Detailed Setup”“2Zone” Sets the Dual Zone System.“OFF”/ “ON”“2Zone Select”* 1 Specifies the destination of sub source soundwhen the Dual Zone function is turned on.“Rear”/ “Front”*1 The Dual Zone System is set to “ON”.( : Factory setting)1 Select the sourcePress the [SRC] button. Turn the [VOL] knob andpress it when the desired item is displayed.Select a source other than “STANDBY”.✍ SRC Select mode 2: Pressing the [SRC] buttonrepeatedly switches source.2 Enter Audio Control modePress the [VOL] knob.3 Turn the [VOL] knob and press it when thedesired item is displayed.Select “Detailed Setup”.4 Select the item you want to setTurn the [VOL] knob and press it when the