Kenwood KDC-BT945U Instruction Manual

Also see for KDC-BT945U: Service manual Quick start guide Instruction manual

Contents

Kenwood KDC-BT945U Instruction Manual Manual pdf 42 page image

42 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745UCar Type SelectionYou can compensate the delay of the sound arrivaltime by selecting your environment from thefollowing car types.Display Overview“OFF” Not compensating.“Compact” Compact car“Full size car” Full size car“Wagon” Station wagon“Minivan” Minivan“SUV” Sport-utility vehicle“Minivan (Long)” Long Minivan( : Factory setting)1 Select the sourcePress the [SRC] button. Turn the [VOL] knob andpress it when the desired item is displayed.Select a source other than “STANDBY”.✍ SRC Select mode 2: Pressing the [SRC] buttonrepeatedly switches source.2 Enter Audio Control modePress the [VOL] knob.3 Enter Cabin select modeTurn the [VOL] knob and press it when thedesired item is displayed.Select “Detailed Setup” > “Car Type”.4 Select the car typePress the [4] or [¢] button.5 Set the valuePress the [VOL] button.6 Exit Audio Control modePress the [MENU] button for at least 1 second,and then press it again briefly.⁄• You can compensate the distances in more details byusing (page 43) function.Speaker SettingThe speaker X’Over is automatically set when theposition and size of each speaker are selected fromthe following items.Speaker Item Range“FRONT” “SIZE” Speaker Size FrontKDC-X994/ KDC-X794:“O.E.M.”, “4inch”, “5inch”, “6 1/2inch”,“6 3/4inch”, “7inch”, “4x6”, “5x7”, “6x8”,“6x9”, “7x10”KDC-BT945U/ KDC-MP745U:“Small”, “Medium”, “Large”“LOCATION” Speaker Location Front“Door”, “On Dash”, “Under Dash”“TWEETER” Speaker Size Tweeter“None”, “Use”“REAR” “SIZE” Speaker Size RearKDC-X994/ KDC-X794:“None”, “O.E.M.”, “4inch”, “5inch”,“6 1/2inch”, “6 3/4inch”, “7inch”, “4x6”,“5x7”, “6x8”, “6x9”, “7x10”KDC-BT945U/ KDC-MP745U:“None”, “Small”, “Medium”, “Large”“LOCATION” Speaker Location Rear• “Door”, “Rear Deck”• “2nd Row”, “3rd Row” (Car Type:“Minivan”, “Minivan (Long)”)“SUB W” “SIZE” Speaker Size SubwooferKDC-X994/ KDC-X794:“None”, “6 1/2inch”, “8inch”, “10inch”,“12inch”, “15inch Over”KDC-BT945U/ KDC-MP745U:“None”, “Small”, “Large”( : Factory setting)1 Select the sourcePress the [SRC] button. Turn the [VOL] knob andpress it when the desired item is displayed.Select a source other than “STANDBY”.✍ SRC Select mode 2: Pressing the [SRC] buttonrepeatedly switches source.2 Enter Audio Control modePress the [VOL] knob.3 Enter Speaker setting modeTurn the [VOL] knob and press it when thedesired item is displayed.Select “Detailed Setup” > “Speaker”.4 Select the item you want to setOperation type OperationSelects the item. Turn the [VOL] knob.Adjust each item. Press the [4] or [¢] button.Set the value Press the [VOL] button.DSP SetupSRC4VOL¢MENU