Kenwood KDC-BT945U Instruction Manual

Also see for KDC-BT945U: Service manual Quick start guide Instruction manual

Contents

Kenwood KDC-BT945U Instruction Manual Manual pdf 39 page image

English | 39Manual Equalizer ControlYou can adjust following Equalizer Control items.KDC-X994/ KDC-X794Band Item Range“BAND1” (62.5 Hz) “GAIN” Band level -9 –+9 dB“EFCT” Bass Effect “ON”/ “OFF”“BAND2” (250 Hz) “GAIN” Band level -9 –+9 dB“BAND3” (1 kHz) “GAIN” Band level -9 –+9 dB“BAND4” (4 kHz) “GAIN” Band level -9 –+9 dB“BAND5” (16 kHz) “GAIN” Band level -9 –+9 dB( : Factory setting)KDC-BT945U/ KDC-MP745UBand Item Range“BAND1” (60/ 100/160/ 250/ 400 Hz)“GAIN” Band level -9 –+9 dB“Q” Quality 0.25/ 0.5/ 1.0/2.0“BAND2” (630/ 1k/1.6k/ 2.5k Hz)“GAIN” Band level -9 –+9 dB“Q” Quality 0.25/ 0.5/ 1.0/2.0“BAND3” (4k/ 6.3k/10k/ 16k kHz)“GAIN” Band level -9 –+9 dB“Q” Quality 0.25/ 0.5/ 1.0/2.0( : Factory setting)1 Select the sourcePress the [SRC] button. Turn the [VOL] knob andpress it when the desired item is displayed.Select a source other than “STANDBY”.✍ SRC Select mode 2: Pressing the [SRC] buttonrepeatedly switches source.2 Enter Audio Control modePress the [VOL] knob.3 Enter Manual Equalizer Control modeTurn the [VOL] knob and press it when thedesired item is displayed.Select “Equalizer” > “Manual Equalizer”.4 Select the item you want to setOperation type OperationSelects the item. Turn the [VOL] knob.Adjust each item. Press the [4] or [¢] button.Set the value Press the [VOL] button.5 Exit Audio Control modePress the [MENU] button for at least 1 second,and then press it again briefly.⁄• When “iPod” is selected in the section curve Select> (page 39), Manual Equalizer Control isdisabled.• You can select for each source.Preset Equalizer curve SelectYou can select following Equalizer curve.Display Equalizer curve“Natural” Natural“User” User*“Rock” Rock“Pops” Pops“Easy” Easy“Top 40” Top 40“Jazz” Jazz“Game” Game“iPod” iPod (During iPod source only)* The Equalizer curve set in the section EqualizerControl> is recalled.( : Factory setting)1 Select the sourcePress the [SRC] button. Turn the [VOL] knob andpress it when the desired item is displayed.Select a source other than “STANDBY”.✍ SRC Select mode 2: Pressing the [SRC] buttonrepeatedly switches source.2 Enter Audio Control modePress the [VOL] knob.3 Enter Preset Equalizer modeTurn the [VOL] knob and press it when thedesired item is displayed.Select “Equalizer” > “Preset Equalizer”.4 Select the Equalizer curvePress the [4] or [¢] button.✍ Select the iPod Equalizer curveYou can select from 22 Equalizer curve types foriPod when “iPod” is selected.1. Enter iPod Equalizer modePress the [VOL] knob.2. Select the iPod Equalizer curvePress the [4] or [¢] button and press itwhen the desired item is displayed.5 Exit Audio Control modePress the [MENU] button for at least 1 second,and then press it again briefly.⁄• You can select for each source.