Kenwood KDC-MP6039 Instruction Manual

Also see for KDC-MP6039: Service manual Service manual

16 | KDC-MP6539U/ KDC-MP6039Audio Preset MemoryRegistering the value setup by Sound Control. Thememory cannot be erased by the Reset button.1 Setup Sound ControlRefer to the following operations to setup theSound Control.-

2 Select Audio Preset item during Menumode (Other than Standby mode)Select the “Audio Preset” display.For how to select Function Control items, refer to (page 6).3 Enter Audio Preset modePress the Control knob for at least 1 second.4 Select the Audio Preset MemoryTurn the Control knob.Select the “Memory” display.5 Determine whether to put the Audio Preset inthe memoryPress the Control knob.“Memory?” is displayed.6 Put the Audio Preset in the memorySelect “YES” using the Control knob.Press the Control knob.“Memory Completed” is displayed.7 Exit Audio Preset modePress the [FNC] button.⁄• Register 1 pair of Audio Preset Memory. You cannotregister by the source.• When you press the Reset, all the sources will be thesetting value which is registered.• The following items cannot be registered.Volume, Balance, Fader, Loudness, Volume offset, DualZone System, Rear VolumeAudio AdjustmentsSpeaker SettingFine-tuning so that the System Q value is optimalwhen setting the speaker type as follows;Speaker type DisplayOFF “OFF”For 5 & 4 in. speaker “5/4inch”For 6 & 6x9 in. speaker “6x9/6inch”For the OEM speaker “O.E.M.”1 Enter StandbySelect the “STANDBY” display.For how to select source item, refer to Source Select button> of (page4).2 Enter Speaker Setting modePress the [AUD] knob.“SP SEL” is displayed.3 Select the Speaker typeTurn the [AUD] knob.4 Exit Speaker Setting modePress the [AUD] knob.