Kenwood KDC-MP6039 Instruction Manual

Also see for KDC-MP6039: Service manual Service manual

18 | KDC-MP6539U/ KDC-MP6039Function of remote controlDirect TV TuningEntering the TV channel and tuning.1 Enter Direct TV Tuning modePress the [DIRECT] button on the remotecontrol.“– –” is displayed.2 Enter the TV channelPress the number buttons on the remotecontrol.Example:Desired channel Press button8 ch [0], [8]Cancelling Direct TV TuningPress the [DIRECT] button on the remotecontrol.Preset TuningRecalling the TV channels in the memory.1 Enter Preset Tuning Select modeTurn the Control knob.A list is displayed.2 Select a desired station in the memoryTurn the Control knob.3 Recall the stationPress the Control knob.Cancelling Preset TuningPress the [FNC] button.Preset MemoryPutting the TV channels in the memory.1 Select the TV channel to put in the memoryPush the Control knob towards right or left.2 Enter Preset Memory modeSelect “P.MEM”.For how to select Function Control item, refer to (page 6).3 Select the number to put in the memoryTurn the Control knob.4 Determine the number to put in the memoryPress the Control knob.5 Allow the determined number to take effectPress the Control knob.Cancelling the Preset Memory modePress the [FNC] button.Basic OperationSelecting TV sourcePress the [SRC] button.Select the “TV” display.For how to select source item, refer to Source Select button> of (page4).Select the TV band and Video inputPush the Control knob toward up.Each time you push the knob, TV bands and Videoinput alternate.Select the TV channelPush the Control knob towards right or left.TV control (Optional)