English | 91 Enter Text Display Selection mode (In DisplayType A/ B/ C/ D/ F)Select “DISP” > “TEXT”.For how to select Function Control item, refer to (page 6).2 Select the text display part (Display Type A/ B/C/ D only)Push the Control knob towards up or down.The selected text display part blinks.3 Select the textTurn the Control knob or push it towards leftor right.4 Exit Text Display Selection modePress the Control knob.⁄• If the selected display item does not have anyinformation, alternative information is displayed.• Some items cannot be selected depending on thedisplay type and row.• When selecting “Folder Name” while playing withiPod, names will be displayed depending on currentlyselected browsing items.Function of KDC-MP6539UKey Color SelectionSelecting the Key (Button) color.1 Enter Key Color Selection modeSelect “K-COL” .For how to select Function Control item, refer to (page 6).2 Select the Key ColorBasic colorTurn the Control knob or push it towards leftor right.“Variable Scan”/ “Color1” — “Color10”/ “User”Detail color (RGB-based adjustment)Operation type OperationTo select the detail coloradjustment mode.Press the Control knob for at least1 second.To select the color to adjust.(red, green, or blue)Push the Control knob towards rightor left.To adjust color. (Range: 0 – 9) Turn the Control knob or push ittowards up or down.To exit the detail coloradjustment mode.Press the Control knob.3 Exit Key Color Selection modePress the [FNC] button.⁄• When colors are adjusted in the detail color mode, thevalues set with “User” selected in the basic color modeare used.• In the basic color mode, selecting “Variable Scan” scansbasic colors. During scanning, you cannot adjust detailcolors.
