|
10 | EnglishGeneral featuresSpeaker SettingFine-tuning so that the System Q value is optimalwhen setting the speaker type.1 Enter StandbyPress the [SRC] button.Refer to (page 7).Select the "STANDBY" display.2 Enter Speaker Setting modePress the [VOL] knob."SP SEL" is displayed.3 Select the Speaker typeTurn the [VOL] knob.Each time you turn the knob, the setting alternatesbetween the settings shown in the table below.Speaker type DisplayOFF "OFF"For 5 & 4 in. speaker "5/4inch"For 6 & 6x9 in. speaker "6x9/6inch"For the OEM speaker "O.E.M."4 Exit Speaker Setting modePress the [VOL] knob.Subwoofer OutputTurning the Subwoofer output ON or OFF.Push the Control knob toward down for at least2 seconds.Each time you push the knob, Subwoofer outputswitches ON and OFF.When it is ON, "SUB WOOFER ON" is displayed.TEL MuteThe audio system automatically mutes when a callcomes in.When a call comes in"CALL" is displayed.The audio system pauses.Listening to the audio during a callPress the [SRC] button.The "CALL" display disappears and the audio systemcomes back ON.When the call endsHang up the phone.The "CALL" display disappears and the audio systemcomes back ON.ڥ To use the TEL Mute feature, you need to hook upthe MUTE wire to your telephone using a commercialtelephone accessory. Refer to Terminals> (page 44).Function Control modeTo set up various functions of this unit, select tree-structured function items.1 Enter Function Control modePress the [FNC] button.2 Select your desired setup itemSelect a setup item using the Control knob.Operation type OperationMovement between items Turn the Control knob.Selection of item Press the Control knob.Return to previous item Press the [FNC] button.Functions of items are as follows:Display Icon Function of setup item"Menu" "MENU" Allows you to set up the environment. Referto "Display Select" "DISP" Allows you to set up the display. Refer topage 11 to page 18."Preset Memory" "P.MEM" Allows you to put stations in the memory.Refer to (page22)."File Scan" etc. "SCAN"etc.Allows you to set how to play the CD andaudio file. Refer to and Audio file> (page 26)."Return" " " Returns to the previous item.3 Select an option for the selected itemRefer to the related pages for the operation ofeach option.4 Exit Function Control modePress the [FNC] button for at least 1 second.
|
