Kenwood KDC-MP635 Instruction Manual

Also see for KDC-MP735U: Firmware update guide Installation manual

Kenwood KDC-MP635 Instruction Manual Manual pdf 22 page image

22 | EnglishTuner featuresFunction of remote controlDirect Access TuningEntering the frequency and tuning.1 Select the bandPress the [FM] or [AM] button.2 Enter Direct Access Tuning modePress the [DIRECT] button on the remotecontrol."– – – –" is displayed.3 Enter the frequencyPress the number buttons on the remotecontrol.Example:Desired frequency Press button92.1 MHz (FM) [0], [9], [2], [1]810 kHz (AM) [0], [8], [1], [0]Cancelling Direct Access TuningPress the [DIRECT] button on the remotecontrol.Station Preset MemoryPutting a station in the memory.1 Select the bandPush the Control knob towards [FM] or [AM].2 Select the frequency to put in the memoryPush the Control knob towards [4] or [¢].3 Enter Preset Memory modeUsing the Control knob, select "P.MEM".For the operation method, refer to Control mode> (page 10).4 Select the number to put in the memoryTurn the Control knob.5 Determine the number to put in the memoryPress the Control knob.6 Allow the determined number to take effectPress the Control knob.Cancelling the Preset Memory modePress the [FNC] button.Auto Memory EntryPutting stations with good reception in the memoryautomatically.1 Select the band for Auto Memory EntryPush the Control knob towards [FM] or [AM].2 Open Auto Memory EntryPress the [AME] button for at least 2 seconds.When 6 stations that can be received are put in thememory Auto Memory Entry closes.Preset TuningRecalling the stations in the memory.1 Select the bandPush the Control knob towards [FM] or [AM].2 Enter Preset Tuning Select modeTurn the Control knob.3 Select a desired station in the memoryTurn the Control knob.4 Recall the stationPress the Control knob.Cancelling Preset TuningPress the [FNC] button.⁄• This function can be operated with [1] — [6] button.- Press the desired [1] — [6] button.⁄• This function can be operated with [1] — [6] button.- Press the desired [1] — [6] button for at least 2 seconds.