Kenwood KDC-MP635 Instruction Manual

Also see for KDC-MP735U: Firmware update guide Installation manual

Kenwood KDC-MP635 Instruction Manual Manual pdf 35 page image

English | 35In Standby modeDate ModeSetting the date format.1 Select Date ModeTurn the Control knob.Select the "Date Mode" display.2 Enter Date modePress the Control knob for at least 1 second.3 Select the date formatTurn the Control knob or push it towards up ordown.4 Exit Date modePress the [FNC] button.In Standby modeDSI (Disabled System Indicator)A red indicator will blink on the unit after thefaceplate is removed, warning potential thieves.Display Setting"DSI : ON" LED flashes."DSI : OFF" LED OFF.Display Illumination ControlThis function turns off the display when youperform no operation for 5 seconds. This function iseffective when you are driving at night.Display Setting"Display : ON" Keeps the display on."Display : OFF" Turns off the display when you perform nooperation for 5 seconds.⁄• Set the Display Illumination Control when the (page 40) is set to OFF.• When the display is off, pressing any key will turn on thedisplay.• When the display is off, you cannot perform anyoperation except for the following:• Volume• Attenuator• Selecting the source• Turning off the power• During function control, such as the Menu System, thedisplay stays on.In Standby modeDimmerDimming this unit’s display automatically when thevehicle light switch is turned ON.Display Setting"Dimmer : ON" The display dims."Dimmer : OFF" The display doesn’t dim.In Standby modeBuilt-in Amp SettingControlling the built-in amplifier.Turning OFF this control enhances the preoutquality.Display Setting"AMP : ON" The built-in amplifier activates."AMP : OFF" The built-in amplifier deactivates.