Kenwood KDC-MP635 Instruction Manual

Also see for KDC-MP735U: Firmware update guide Installation manual

Kenwood KDC-MP635 Instruction Manual Manual pdf 32 page image

32 | EnglishMenu systemMenu SystemSetting beep sound during operation, etc.functions.The Menu system basic operation method isexplained here. The reference for the Menu itemsand their setting content is after this operationexplanation.1 Enter Menu modeUsing the Control knob, select "MENU".For the operation method, refer to Control mode> (page 10).2 Select the menu itemTurn the Control knob or push it towards up ordown.Example: When you want to set the beep soundselect the "Beep" display.3 Set the menu itemPush the Control knob towards right or left.Example: When you select "Beep", each time youpush the knob it alternates between"Beep : ON" or "Beep : OFF". Select 1 ofthem as the setting.You can continue by returning to step 2 andsetting other items.4 Exit Menu modePress the [FNC] button.⁄• When other items those applicable to the basicoperation method above are displayed, their settingcontent chart is entered. (Normally the setting listed atthe top of the chart is the original setting.)Also, the explanation for items that are not applicable( etc.) are entered step bystep.• Three menu items appear on the display. The menu itemdisplayed at the center is the one you can adjust.SRCFNC Control knobFunction icon