English | 33In Standby modeActivating Security CodeActivating the Security Code disables the usageof audio unit by someone else. Once the SecurityCode is activated, the entry of authorized SecurityCode is required to turn on the audio unit when it isremoved from the vehicle. Indication of this SecurityCode activation prevents your precious audio unitfrom stealing.⁄• You can set the Security Code with a 4 digit number of yourchoice.• The Security Code cannot be displayed or referenced. Makea note of the Security Code and treasure it up.1 Enter StandbyPress the [SRC] button.Select the "STANDBY" display.Refer to (page 7).2 Enter Menu modeUsing the Control knob, select "MENU".For the operation method, refer to Control mode> (page 10)."Security Set" is displayed.3 Enter Security Code modePress the Control knob for at least 1 second.When "Enter" is displayed, "SECURITY SET" is alsodisplayed.4 Select the digits to enterPush the Control knob towards right or left.5 Select the Security Code numbersTurn the Control knob or push it towards up ordown.6 Repeat step 4 and 5, and complete the SecurityCode.7 Confirm the Security CodePress the Control knob for at least 3 seconds.When "Re-Enter" is displayed, "SECURITY SET" is alsodisplayed.8 Do the step 4 through 7 operation, and reenterthe Security Code."Approved" is displayed.The Security Code function activates.⁄• If you enter the wrong code in step 4 through 6, repeatfrom step 4.In Standby modeDeactivating Security CodeTo deactivate the Security Code function.1 Select Security Code modeTurn the Control knob.Select the "Security Clear" display.2 Enter Security Code modePress the Control knob for at least 1 second.When "Enter" is displayed, "SECURITY CLEAR" is alsodisplayed.3 Select the digits to enterPush the Control knob towards right or left.4 Select the Security Code numbersTurn the Control knob or push it towards up ordown.5 Repeat steps 3 and 4, and complete theSecurity Code.6 Press the Control knob for at least 3 seconds."Clear" is displayed.The Security Code function deactivates.7 Exit Security Code modePress the [FNC] button.⁄• If a wrong security code is entered, "Error" is displayed.Enter a correct security code.9 Exit Security Code modePress the [FNC] button.Resetting the Security Code function when theaudio unit is first used after removed from thebattery power source or the Reset button ispressed1 Turn the power ON.2 Do the step 4 through 7 operation, and enterthe Security Code."Approved" is displayed.Now, you can use the unit.⁄• When the Security Code function is activated, "SecuritySet" changes to "Security Clear".• To deactivate the Security Code function, see the nextsection .
