Kenwood KDC-MP928 Instruction Manual

Also see for KDC-MP928: Service manual

28 | EnglishGeneral featuresStation/Disc Naming (SNPS/DNPS)Attaching a title to a Station or CD.1 Receive/play the station/disc you want toattach a title to• A title cannot be attached to MD or Audio file media.2 Enter Menu modePress the [MENU] button for at least 1 second."MENU" is displayed.3 Select Name set modePush the Control knob towards [4] or[¢].Select the "Name Set" display.4 Enter Name set modePress the Control knob for at least 1 second.5 Move the cursor to the enter characterpositionPush the Control knob towards [4] or[¢].6 Select the character typePress the Control knob.Each time you press the knob, the character typealternates between the types shown in the tablebelow.Character type DisplayAlphabet upper case "A-Z"Alphabet lower case "a-z"Numbers and symbols "1•*"Special characters (Accent characters) "ë"7 Select the charactersPush the Control knob towards [FM] or [AM].• Enter characters by using a remote control withnumbers buttons.Example: If you are entering "DANCE".Character Button Times pressed"D" [3] 1"A" [2] 1"N" [6] 2"C" [2] 3"E" [3] 28 Repeat steps 5 through 7 and enter the name.9 Exit Menu modePress the [MENU] button.• When operation stops for 10 seconds the name atthat time is registered, and Menu mode closes.• Memory numbers- FM/AM: 30 stations- Internal CD player: 10 discs- External CD changer/ player: Varies according to theCD changer/ player. Refer to the CD changer/ playermanual.• Change the title of station/CD by the same operationused to name it.TEL MuteThe audio system automatically mutes when acall comes in.When a call comes in"Call" is displayed.The audio system pauses.Listening to the audio during a callPress the [SRC] button.The "Call" display disappears and the audiosystem comes back ON.When the call endsHang up the phone.The "Call" display disappears and the audiosystem comes back ON.