Kenwood KDC-MP928 Instruction Manual

Also see for KDC-MP928: Service manual

English | 49Display Setting"Zone2: Rear" Sub source (Auxiliary input source) is to be rearchannel."Zone2: Front" Sub source (Auxiliary input source) is to be frontchannel.Traffic InformationSwitching to traffic information automaticallywhen a traffic bulletin starts even when you aren’tlistening to the radio.Display Setting"TI: OFF" The Traffic Information function is OFF."TI: ON" The Traffic Information function is ON.When a traffic bulletin starts, "Traffic INFO" isdisplayed it and it switches to traffic information.• During reception of an AM station when the TrafficInformation function is turned ON, it switches to anFM station.• During reception of traffic information the adjustedvolume is automatically remembered, and the nexttime it switches to traffic information it’s automaticallythe remembered volume.Receiving other traffic information stations(In tuner source)Push the Control knob towards [4] or[¢].• You can change the traffic information station whenlistening to the radio.In FM receptionCRSC (Clean Reception SystemCircuit)Temporarily have reception alternate fromstereo to mono to reduce multi-path noise whenlistening to the FM station.Display Setting"CRSC: ON" The CRSC is ON."CRSC: OFF" The CRSC is OFF.• Strong electrical fields (such as from power lines) maycause unstable sound quality when CRSC is turnedON. In such a situation, turn it OFF.In HD Radio modeReceive mode SettingSets the receive mode.1 Select the Receive modePush the Control knob towards [4] or[¢].Select the "Receive Mode" display.2 Enter Receive modePress the Control knob for at least 1 second.3 Set the Receive modePush the Control knob towards [FM] or [AM].Each time you push the knob, the Receive modealternates between the modes shown in thetable below.Receive mode Display OperationAuto mode "Auto" Analog broadcasts and digitalbroadcasts will be switchedautomatically.When both are being transmitted,the digital broadcast will havepriority.Digital "Digital" Digital broadcasts only.Analog "Analog" Analog broadcasts only.4 Exit Receive modePress the [MENU] button.• Even if the Receive mode is set to "Auto", when theBall game mode program (non-delayed broadcastprogram) is received, the Receive mode willautomatically switch to Analog broadcast only.