English|5Notes• If you experience problems during installation,consult your Kenwood dealer.• If the unit fails to operate properly, press the Resetbutton to restore factory settings.• Press the reset button if the disc auto changer failsto operate correctly. Normal operation should berestored.Reset button• We recommend the use of (page 44) to prevent theft.• The characters conforming to ISO 8859-1character set can be displayed.• There are places in this manual where litindicators are described; however, the only timean indicator will light is in the following settings.When Indicator is selected as mentioned in Display Switching> (page 22)• The illustrations of the display and the panelappearing in this manual are examples used toexplain more clearly how the controls are used.Therefore, what appears on the display in theillustrations may differ from what appears on thedisplay on the actual equipment, and some of theillustrations on the display may be inapplicable.Cleaning the UnitIf the faceplate of this unit is stained, wipe it with adry soft cloth such as a silicon cloth.If the faceplate is stained badly, wipe the stain offwith a cloth moistened with neutral cleaner, thenwipe it again with a clean soft dry cloth.• Applying spray cleaner directly to the unit may affect itsmechanical parts. Wiping the faceplate with a hard clothor using a volatile liquid such as thinner or alcohol mayscratch the surface or erases characters.Cleaning the Faceplate TerminalsIf the terminals on the unit or faceplate get dirty,wipe them with a clean soft dry cloth.Before using this unit for the first timeThis unit is initially set on the Demonstration mode.When using this unit for the first time, cancel the (page 52).About ODD (Offset Dual Differential) D/ASystemYou can enjoy high quality sound play whenplaying music CDs with the ODD D/A Systemenabled. ODD D/A System has two built-in D/Aconverters and each D/A converter processes D/Aconversion seperately on the front left and rightchannel. Since digital processing is performed foreach channel seperately, noise occurance frominterference between channels is completelysuppressed and the seperation of audio soundoutput from two channels is distinguished andclear. Also, the ODD/A System produces the databy which the sound data is offset on the minus sideand converts the two signals (original and offsetdata) to the analog signal, which has less noise anddistortion, by the synthetic process.However, ODD D/A System will be disabled if thefollowing settings are selected.- When "2ZONE" of "ON".- When (page 16) is "Bypass".
