Kenwood KDC-PS909 Instruction Manual

Also see for KDC-PS909: Instruction manual Instruction manual Instruction manual

Kenwood KDC-PS909 Instruction Manual Manual pdf 10 page image

— 10 —EnglishBasic operations (See page 6)Attenuator Gain SelectionThe attenuator gain can be switched to either -20 dB or -60 dB.Choose the -60dB setting when using a high-output amplifier.The factory default is -20dB.Hold down the MENU button for one second or more."MENU" is displayed and the menu mode is turned on.Press the ¢ button repeatedly until the monaural receptionfunction appears in the display.Press the 4 button to search in the other direction.The function setting is indicated by "ATT LOW" or "ATT HIGH"in the display, indicating that the current setting is low or high,respectively.When "ATT LOW" is displayed, the attenuator gain is set at-20dB. When "ATT HIGH" is displayed, it is set at -60dB.Switching settingsPress either the AM or FM button.The display and setting will change.Press the MENU button to end the menu mode.4321Switching ModesSwitching Modes:Each time you press the SRC button, the mode switches asfollows:tTuner modetCD modetDisc control mode• The mode switches to the next mode from any mode whichcannot be used.• The disc control mode will differ depending on the unit that isconnected.NOTEVolumeIncreasing Volume:Press the u button to turn up the volume.Decreasing Volume:Press the d button to turn down the volume.AttenuatorThis function allows you to turn down the volume quickly.Turning Attenuator On/Off:Press the ATT button to switch the attenuator on and off.When the attenuator is on, the ATT indicator blinks.When the attenuator is off, the volume returns to the originallevel.Turning down the volume all the way turns off the attenuatorfunction.NOTELoudnessThis function amplifies low and high tones when the volumeis turned down.The LOUD indicator lights up, when the loudness function ison.Turning Loudness On/Off:Hold down the LOUD button for one second or more to switchthe loudness on and off.