— 26 —EnglishOther features (See page 8)Table of Audio Control SettingBass(“BAS”)Treble(“TRE”)Balance(“BAL”)Fader(“FAD”)Non-FadingPreout Level(“NF”)Bass decreased.Treble decreased.Left channelemphasized.Rear channelincreased.Non-fading sound isreduced.Bass increased.Treble increased.Front channelincreased.Non-fading soundemphasized.Right channelemphasized.Adjustmentmode(Display) 4 button ¢ buttonOperation of Audio control buttonBalancedmonauralpreout level(“SUB”)Monaural sound isreduced.Monaural soundemphasized.Balanced OutputYou can change preouts to balanced outputs, which allowsyou to reduce noise if the amplifier being connected hasbalanced input. The factory default is unbalanced output.The balanced monaural sound output can be set to either ONor OFF. The non-fading sound output can be set to either ONor OFF. The factory default is set to ON.Switching balanced / unbalanced output:Hold down the MENU button for one second or more."MENU" is displayed and the menu mode is turned on.Press the ¢ button repeatedly until the Balanced outputfunction appears in the display.Press the 4 button to search in the other direction.The function setting is indicated by "UNBALANCED" or"BALANCED" in the display, indicating that the current output isbalanced or unbalanced, respectively."UNBALANCED" (Unbalanced output)"BALANCED" (Balanced output)The front/rear output corresponds to the L/R channels duringbalanced output. The non-fading preout will change tomonaural (mono) sounds during balanced output.Switching settingsPress either the AM or FM button.The display and setting will change.Press the MENU button to end the menu mode.• The audio control and volume return to factory default settingseach time you switch between balanced and unbalanced output.NOTE4321UNBALANCED BALANCEDLeft Left -Right Right -Left Left +Right Right +Left Monaural +Right Monaural -FRONTREARNON-FADING