Kenwood KDC-PS909 Instruction Manual

Also see for KDC-PS909: Instruction manual Instruction manual Instruction manual

Kenwood KDC-PS909 Instruction Manual Manual pdf 30 page image

Hold down the DISP button for three seconds or more.The security code will be set."RE-ENTER" will appear in the display for one second, askingyou to enter the code once again for confirmation. When"CODE" appears in the display, you can start inputting thecode.Press the Preset button and input the security code again.Hold down the DISP button again for three seconds or more."APPROVED" will appear in the display, with the code securityfunction turning on. From this point on, if the unit isdisconnected from the battery, the security code must beentered the first time that the unit's power is turned on."ENTER" and "CODE" will appear in the display, asking you toinput the code.If you input an incorrect security code, the display ask you oncemore to input the correct one. Follow the procedure in step 7above.If you press the RESET button or remove the battery:The first time you turn the unit on again, "CODE" will appear inthe display, asking you to input the security code.Repeat steps 7 and 8 above, and input the security code.You can start operating the unit again when "APPROVED"appears in the display.If you enter the incorrect code, the power will turn off. Enterthe correct code to turn the unit on.NOTE876— 30 —EnglishOther features (See page 8)Code Security FunctionWhen the battery is removed from the unit’s power switch,you cannot turn on the unit again unless the preset securitycode is input. This function helps prevent theft.You must follow steps 1 to 8 to be able to use the Code Securityfunction. Turning off the power during the procedure willdeactivate the security code setting.Once the code security function has been activated, "SECURITY"disappears from the MENU system. Note that it will no longer bepossible to cancel this function afterwards.Select the four digits to use in your security code.The four-digit security code is very important, as you will need itto turn the unit on again when the code security function is on.Choose the number carefully and do not forget it (write it downand keep it separately in a safe place).Hold down the MENU button for one second or more."MENU" is displayed and the menu mode is turned on.Press the ¢ button repeatedly until "SECURITY" appears inthe display.Press the 4 button to search in the other direction.Hold down either the AM or FM button for two seconds ormore."ENTER" will appear in the display for one second, indicatingthe code setting mode has been entered. When "CODE"appears in the display, you can start inputting the code.Press the preset button and enter the security code that youhave selected in step 1.Example: Use “3510” as the security code.5432NOTE1NOTEStep Button to press # Timespressed Display1 #1 4 “3”36 “5”#22#3 “1”24 #4 1 “0”