— 29 —Adjusting TimeYou can adjust the time manually. Also, with the automatictime adjustment function set at ON, you can set the clock timeautomatically according to time data sent from RBDS stations(after receiving RBDS signals for several minutes). The factorydefault is manual time adjustment.Adjusting Time Manually:Hold down the MENU button for one second or more."MENU" is displayed and the menu mode is turned on.Pressing the ¢ button repeatedly until the "CLOCK ADJST"appears in the display.Press the 4 button to search in the other direction.Hold down either the AM or FM button for two seconds ormore to enter the Time Adjustment mode.The hour display will blink.• Adjusting the hoursPress the FM button to advance the hours, or press the AMbutton to make the hours go back.• Adjusting the minutesPress the ¢ button to advance the minutes, or press the4 button to make the minutes go back.Press the MENU button to end the menu mode.Manual adjustment is effective only when the automaticadjustment is off.Turning Automatic Time Adjustment On/Off:Hold down the MENU button for one second or more."MENU" is displayed and the menu mode is turned on.Pressing the ¢ button repeatedly until the Automatic TimeAdjustment function appears in the display.Press the 4 button to search in the other direction.The function setting is indicated by "SYNC ON" or "SYNC OFF"in the display, indicating that the Automatic Time Adjustmentis on or off, respectively."SYNC ON" (Automatic time adjustment)"SYNC OFF" (Manual time adjustment)21NOTE54321Switching settingsPress either the AM or FM button.The display and setting will change.Press the MENU button to end the menu mode.Adjusting Time Automatically:Tune to a RBDS station and receive the signal for severalminutes.The clock will adjust automatically to the local time.The clock will not adjust automatically if the RBDS station tunedto is not transmitting time data. In such a case, try anotherRBDS station.NOTE43