|
12 | KDC-U546BTOperation of Hands-Free PhoningConnecting a Bluetooth DeviceBefore use the Bluetooth device, you need toconnect Bluetooth device to this unit. The following3 steps procedure is necessary.Step 1. Pairing (Registering from Bluetoothdevices)To make your Bluetooth device (cell-phone) usablewith this unit, you need to register it (pairing).1 Turn on this unit.Press the [SRC] button.2 Start registering this unit by operating theBluetooth deviceBy operating the Bluetooth device, register thehands-free unit (pairing). Select “KENWOOD BTCD/R-3P1” from the list of connected units.3 Enter a PIN codeInput the PIN code (“0000”) in the Bluetoothdevice.Check that registration is complete on theBluetooth device. PIN code is set to “0000” asthe default. You can change this code. Refer to (page 22).4 By operating the Bluetooth device, start hands-free connection.Step 2. ConnectionIf you have registered 2 or more cell-phones, youneed to select one of them. For more details, seeConnect> (page 23).When a cell-phone is connected, the “BT” indicatoris lights up.Step 3. Hands-free phoningYou can do hand-free phoning when theconnection is made.[SRC] [VOL][1] — [6][] / [E][ ] [VOICE][BAND][ ]⁄• When registering from this unit. Refer to Bluetooth Device> (page 21).• For details on the Bluetooth cell-phone with the hands-free function, see (page 29).Making a CallYou can select following dialing method.1 Enter Bluetooth modePress the [VOL] knob.“BT MODE” is displayed.2 Enter dialing method modePress the [ ] button.“PHONE BOOK is displayed.3 Select a dialing methodTurn the [VOL] knob and press it when thedesired item is displayed.Display Overview“PHONE BOOK” Selecting the initial to be searched or name for thephone book.“OUT-CALL” Calling a number in the outgoing call list.“IN-CALL” Calling a number in the incoming call list.“MISSED CALLS” Calling a number in the missed calls list.“NUMBER DIAL” Making a call by entering phone number.Operation method of each mode is describedbelow.4 Exit the dialing method modePress the [ ] button for at least 1 second.Disconnecting a CallPress the [SRC] button.Calling a Number in the Phone Book1 Select the Phone Book modeFor how to select dialing method, refer to a Call> (page 12).Select the “PHONE BOOK” display.2 Select the initial to be searched forOperation type OperationMove to the next character. Turn the [VOL] knob.Move to the next row. Press the [BAND] button.Determine the selected initial. Press the [VOL] knob. PreviousNext |