Kenwood KDC-U546BT Instruction Manual

Also see for KDC-U546BT: Service manual

English | 15Audio AdjustmentsAudio ControlYou can adjust following Audio Control items.1 Select the sourcePress the [SRC] button.Select the “TUNER”/“USB”/“iPod” or “CD”/“AUX”display.2 Enter Function Setting modePress the [VOL] knob for at least 1 second.“FUNCTION” is displayed.3 Select the function itemTurn the [VOL] knob and press it when thedesired item is displayed.Select “AUDIO CONTROL” > Function item orselect “AUDIO CONTROL” > “DETAILED SET” >>Function item.Function item Selectable setting/item“SUBWOOFER SET” Turns on/off the subwoofer output.OFF/ON“BASS BOOST” Selects bass boost setting mode.OFF/LV1/LV2 (The indicator turns on accordingto the setting.)“SYSTEM Q” Switches between the following preset equalizercurves. “EQ“ indicator is lights when System Q isset to an EQ mode other than “NATURAL”.NATURAL/USER/ROCK/POPS/EASY/TOP40/JAZZ/GAMEFor USER: This appears when Bass level, Middlelevel, and Treble level are adjusted.“BASS LEVEL” You can set bass level for each source.–8 — 0 — +8“MID LEVEL” You can set middle level for each source.–8 — 0 — +8“TRE LEVEL” You can set treble level for each source.–8 — 0 — +8“BALANCE” Adjusts left/right speaker balance.(Left) L15 — 0 — R15 (Right)“FADER” Adjusts front/rear speaker balance.(Rear) R15 — 0 — F15 (Front)“SUB-W LEVEL” You can set subwoofer level.–15 — 0 — +15“DETAILED SET” Move to detailed item“LPF SUBWOOFER” Selects cut off frequency of subwoofer output.85/120/160/THROUGH (OFF) Hz“SUB-W PHASE” Selects the phase of subwoofer output.REVERSE (180°)/ NORMAL (0°)“SUPREME SET” Turns on/off the supreme function.OFF/ON“VOLUME OFFSET” Sets each source’s volume as a difference fromthe basic volume.–8 — 0 (AUX: –8 —0 — +8)(Factory setting: Underlined)4 Make a settingTurn the [VOL] knob and press it when thedesired item is displayed.5 Exit Function Setting modePress the [ ] button for at least 1 second.⁄• SUPREME:Technology to extrapolate and supplement withproprietary algorithm, the high-frequency range that iscut off when encoding at low bit rate (less than 128Kbps,Sampling frequency is 44.1kHz).Supplementing is optimized by compression format(MP3 or WMA) and processed according to bit rate. Theeffect is negligible with music that is encoded at highbit rate, variable bit rate or has minimal high frequencyrange.[SRC] [VOL][ ]