Kenwood KDC-U546BT Instruction Manual

Also see for KDC-U546BT: Service manual

English | 23Selecting the Bluetooth Device YouWish to ConnectWhen 2 or more Bluetooth devices have alreadybeen registered, you need to select the Bluetoothdevice you wish to use.1 Select Bluetooth device selection modeFor how to select setup item, refer to Setup> (page 20).Select “SETTINGS” > “PHONE SELECT”.2 Enter Bluetooth device selection modePress the [VOL] knob.“(name)” is displayed.3 Select the Bluetooth deviceTurn the [VOL] knob.4 Set up the Bluetooth devicePress the [VOL] knob.‘✱(name)’ or ‘-(name)’ is displayed.“✱”: The selected Bluetooth device is busy.“-”: The selected Bluetooth device is on standby.“ “ (blank): The Bluetooth device is deselected.5 Exit Function Setting modePress the [ ] button for at least 1 second.⁄• If a cell-phone is already selected, deselect it, and thenselect a different one.Downloading the SMSDownload the short message (SMS) arrived at thecell-phone so that it can be read on this unit.1 Select SMS download modeFor how to select setup item, refer to Setup> (page 20).Select “SETTINGS” > “SMS DOWNLOAD”.2 Enter SMS download modePress the [VOL] knob.“DOWNLOADING” is displayed.When the downloading finishes, “COMPLETE” isdisplayed.3 Exit Function Setting modePress the [ ] button for at least 1 second.⁄• The cell-phone must be able to transmit the SMS usingBluetooth. Setting on the cell-phone may be required.If the cell-phone does not support SMS function, theSMS download item in Function Control mode is notdisplayed.• When the SMS is downloaded from the cell-phone, theunopened messages in the cell-phone are opened.