Kenwood KDC-X5000BT Instruction Manual

Contents

ENGLISH 9BLUETOOTH®BLUETOOTH — ConnectionSupported Bluetooth profiles– Hands-Free Profile (HFP)– Advanced Audio Distribution Profile (A2DP)– Audio/Video Remote Control Profile(AVRCP)– Serial Port Profile (SPP)– Phonebook Access Profile (PBAP)Supported Bluetooth codecs– Sub Band Codec (SBC)– Advanced Audio Coding (AAC)Connect the microphoneAdjust themicrophone angle Secure using cord clamps (notsupplied) if necessary.Microphone input jackMicrophone (supplied)Rear panelPair and connect a Bluetooth device for the first time1 Press to turn on the unit.2 Search and select this unit model name (KDC-X5***BT) on the Bluetooth device.“PAIRING” “PASS XXXXXX” Device name “PRESS” “VOLUME KNOB” scrolls on the display.• For some Bluetooth devices, you may need to enter the Personal Identification Number (PIN)code immediately after searching.3 Press the volume knob to start pairing.“PAIRING OK” appears when pairing is completed.• This unit supports Secure Simple Pairing (SSP).• Up to 10 devices can be registered (paired) in total.• Once the pairing is completed, the Bluetooth device will remain registered in the unit even if youreset the unit. To delete the paired device, 13, [DEVICE DELETE].Once pairing is completed, Bluetooth connection is established automatically. “BT1” and/or “BT2” onthe display window lights up.• A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at anytime.• Some Bluetooth devices may not automatically connect to the unit after pairing. Connect thedevice to the unit manually.• Refer to the instruction manual of the Bluetooth device for more information.Auto PairingWhen you connect iPhone/ iPod touch/ Android device to the USB input terminal, pairing request(via Bluetooth) is automatically activated.Press the volume knob to pair once you have confirmed the device name.Automatic pairing request is activated only if:– Bluetooth function of the connected device is turned on.– [AUTO PAIRING] is set to [ON]. ( 13)– KENWOOD MUSIC PLAY application is installed on the Android device ( 7) and [BROWSE MODE] isselected ( 8).