Kenwood KDC-X5000BT Instruction Manual

Contents

12BLUETOOTH®Make a call using voice recognition1 Press and hold to activate the voice recognition of theconnected phone.2 Speak the name of the contact you want to call or the voicecommand to control the phone functions.• Supported Voice Recognition features vary for each phone.Refer to the instruction manual of the connected phone fordetails.• This unit also supports the intelligent personal assistantfunction of iPhone.Settings in memoryStore a contact in memoryYou can store up to 6 contacts into the number buttons (1 to 6).1 Press to enter Bluetooth mode.2 Turn the volume knob to select [CALL HISTORY], [PHONE BOOK],or [NUMBER DIAL], then press the knob.3 Turn the volume knob to select a contact or enter a phonenumber.If a contact is selected, press the volume knob to show thephone number.4 Press and hold one of the number buttons (1 to 6).“STORED” appears when the contact is stored.To erase a contact from the preset memory, select [NUMBER DIAL]in step 2 and store a blank number.Make a call from memory1 Press to enter Bluetooth mode.2 Press one of the number buttons (1 to 6).3 Press the volume knob to call.“NO MEMORY” appears if there is no contacts stored.CALL HISTORY (Applicable only if the phone supports PBAP)1 Press the volume knob to select a name or a phone number.• “INCOMING”, “OUTGOING”, or “MISSED” is shown on the lower part of thedisplay to indicate the previous call status.• Press DISP to change the display category (NUMBER or NAME).• “NO DATA” appears if there is no recorded call history.2 Press the volume knob to call.PHONE BOOK (Applicable only if the phone supports PBAP)1 Turn the volume knob quickly to enter alphabet search mode (if the phonebookcontains many contacts).The first menu (ABCDEFGHIJK) appears.• To go to the other menu (LMNOPQRSTUV or WXYZ1*), press J / K.• To select the desired first letter, turn the volume knob or press S / T,then press the knob.Select “1” to search with numbers and select “*” to search with symbols.2 Turn the volume knob to select a name, then press the knob.3 Turn the volume knob to select a phone number, then press the knob to call.• The phonebook of the connected phone is automatically transferred to the unitwhen pairing.• Contacts are categorized as: HOME, OFFICE, MOBILE, OTHER, GENERAL• This unit can display only non-accent letters. (Accent letters such as “Ú” isshowns as “U”.)NUMBER DIAL 1 Turn the volume knob to select a number (0 to 9) or character ( , #, +).2 Press S / T to move the entry position.Repeat steps 1 and 2 until you finish entering the phone number.3 Press the volume knob to call.VOICE Speak the name of the contact you want to call or the voice command to control thephone functions. ( Make a call using voice recognition)BATT LOW/ MID/ FULL*: Shows the strength of the battery.NO SIGNAL/ LOW/ MID/ MAX*: Shows the strength of the current received signal.* Functionality depends on the type of the phone used.