Kenwood KDC-X5000BT Instruction Manual

Contents

ENGLISH 25REMOTE CONTSTEERING WHEELREMOTE INPUTP. CONTANT CONTMUTEWiring connectionWhen connecting to an external amplifier,connect its ground wire to the car’s chassis toavoid damaging the unit.If your car does not have an ISO terminal :We recommend installing the unit with acommercially available custom wiring harnessspecific for your car and leave this job toprofessionals for your safety. Consult your caraudio dealer.Fuse (10 A)Rear/ Front/ Subwoofer outputFor 3-way crossover: Tweeter/ Mid Range/ Woofer outputAntenna terminalLight blue/yellow(Steering remote controlwire)To the steering wheel remote controladapterBlue/White(Power control wire/Antenna control wire)Brown(Mute control wire)To the power control terminal whenusing the optional power amplifier orto the antenna control terminal in thevehicleTo connect the Kenwood navigationsystem, refer your navigations manualYellow (A4)Red (Ignition wire)Red (A7)Yellow (Battery wire)Pin Color and functionA4 Yellow : BatteryA5 Blue/White : Power controlA7 Red : Ignition (ACC)A8 Black : Earth (ground) connectionB1 Purple ] : Rear speaker (right)For 3-way crossover: Tweeter (right)B2 Purple/black [B3 Gray ] : Front speaker (right)For 3-way crossover: Mid range speaker (right)B4 Gray/black [B5 White ] : Front speaker (left)For 3-way crossover: Mid range speaker (left)B6 White/black [B7 Green ] : Rear speaker (left)For 3-way crossover: Tweeter (left)B8 Green/black [ISO connectorsConnecting the ISO connectors on some VW/Audi or Opel(Vauxhall) automobilesYou may need to modify the wiring of the supplied wiring harness asillustrated below.UnitVehicleA7 (Red) Ignition wire (Red)A4 (Yellow)Default wiringBattery wire (Yellow)If no connections are made, do not let the wire come out from the tab.Microphone inputjack ( 9)