Kenwood KDC-X5000BT Instruction Manual

Contents

4Set the clock and date1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select [CLOCK], then press the knob.To adjust the clock3 Turn the volume knob to select [CLOCK ADJUST], then press the knob.4 Turn the volume knob to make the settings, then press the knob.Hour Minute5 Turn the volume knob to select [CLOCK FORMAT], then press the knob.6 Turn the volume knob to select [12H] or [24H], then press the knob.To set the date7 Turn the volume knob to select [DATE FORMAT], then press the knob.8 Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then pressthe knob.9 Turn the volume knob to select [DATE SET], then press the knob.10 Turn the volume knob to make the settings, then press the knob.Day Month Year or Month Day Year11 Press and hold to exit.To return to the previous setting item, press .Set the initial settings1 Press repeatedly to enter STANDBY.2 Press the volume knob to enter [FUNCTION].3 Turn the volume knob to select an item (see the following table),then press the knob.4 Repeat step 3 until the desired item is selected or activated.5 Press and hold to exit.To return to the previous setting item, press .2 Default: XXTUNER SETTINGPRESET TYPE NORMAL: Memorizes one station for each preset button in each band(FM1/ FM2/ FM3/ MW/ LW). ; MIX: Memorizes one station for eachpreset button, regardless of the selected band.SYSTEMKEY BEEP* ON: Activates the keypress tone. ; OFF: Deactivates.SOURCE SELECTBUILT-IN AUX ON: Enables AUX in source selection. ; OFF: Disables. ( 14)P-OFF WAIT Applicable only when the demonstration mode is turned off.Sets the duration when the unit will automatically turn off (while instandby mode) to save the battery.20M: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes ;– – –: CancelsCD READ 1: Automatically distinguishes between audio file disc and music CD. ;2: Forces to play as a music CD. No sound can be heard if an audio filedisc is played.F/W UPDATEUPDATE SYSTEMF/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is notactivated).For details on how to update the firmware, see:www.kenwood.com/cs/ce/FACTORY RESET YES: Resets the settings to default (except the stored station). ;NO: Cancels.* Not applicable if 3-way crossover is selected.3GETTING STARTED