Kenwood KDC-X896 Quick Start Manual

Also see for KDC-452U: Quick start guide

Kenwood KDC-X896 Quick Start Manual Manual pdf 30 page image

20 | KDC-X896/ KDC-BT852HD/ KDC-X496/ KDC-452U/ KMR-550U English | 21ContentsFunction of KDC-X896/ KDC-BT852HD/ KDC-X496/KDC-452U with remote controlDirect access tuningYou can search for a station directly by enteringfrequency.1 Enter the Direct access tuning modePress the [DIRECT] button on the remotecontrol.“– – – –” is displayed.2 Enter the frequencyPress the number buttons on the remotecontrol.Example:Desired frequency Press the following buttons92.1 MHz (FM) [9], [2], [1]810 kHz (AM) [8], [1], [0]3 Search for the frequencyPress the [4] or [¢] button on the remotecontrol.Canceling Direct access tuning modePress the [ ] button on the remote control.Tuner settingYou can set up the tuner.1 Select the Tuner sourcePress the [SRC] button.Select the “TUNER” display.2 Enter the Function setting modePress and hold the Control knob.3 Select the Settings itemTurn the Control knob to select “Settings”, andthen press the Control knob.4 Select a desired Tuner setting itemTurn the Control knob to select Tuner settingitem, and then press the Control knob.Display Description“Settings”“Seek Mode” Sets the tuning mode.Auto1: Automatic search for a station.Auto2: Search in order of the stations in thepreset memory.Manual: Normal manual tuning.“MONO” You can reduce the noise when stereobroadcasts are received as monaural.“ON” / “OFF”“TI” Switches to the traffic informationautomatically when the traffic bulletin starts.“ON” / “OFF”( : Factory setting)5 Select a setting and determine itTurn the Control knob to select a desired tunersetting, and then press the Control knob.The previous item is displayed.6 Exit the Function setting modePress and hold the [ ] button.Tuner operationAuto memoryYou can register 18 (FM)/ 6 (AM) stations with goodreception automatically.1 Select the Tuner sourcePress the [SRC] button.Select the “TUNER” display.2 Enter the Function setting modePress and hold the Control knob.3 Select the Auto memory function itemSelect the following items using the Controlknob.“Settings” “Auto Memory”4 Start storing stations in the Auto memorymodeTurn the Control knob to select “YES”, and thenpress the Control knob.When 18 (FM)/ 6 (AM) stations that can be receivedare stored in the memory, the process in this modeis completed.For the basic operations to listen to the radio, referto the Quick Start Guide.Function of KDC-X496, KDC-452U, KMR-550U